WS-8-250-DC Not passing vlan
-
jready - Member
- Posts: 7
- Joined: Wed Oct 21, 2015 2:39 pm
- Location: Ridgeland, MS
- Has thanked: 0 time
- Been thanked: 0 time
WS-8-250-DC Not passing vlan
ws8-250-DC running 1.4.2rc6. will pass mangement vlan 10 just fine. will not pass vlan 20. I have had this happen on 2 switches. Replace with a WS-12-250-DC w/ same config & 1.4.2rc6 & it work fine.
-
sirhc - Employee
- Posts: 7604
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1674 times
- Been thanked: 1358 times
Re: WS-8-250-DC Not passing vlan
Well all our switches use the same basic design, same switch core, and same firmware so that does not make any sense.
ONLY possibly thing I can think of is the config file is corrupt, try factory defaulting it and then re-setting it back up?
ONLY possibly thing I can think of is the config file is corrupt, try factory defaulting it and then re-setting it back up?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jready - Member
- Posts: 7
- Joined: Wed Oct 21, 2015 2:39 pm
- Location: Ridgeland, MS
- Has thanked: 0 time
- Been thanked: 0 time
Re: WS-8-250-DC Not passing vlan
That seems to have done the trick. That is strange as it was configured from scratch before. I had even deleted that vlan 20 & re-added it with a cold start.
That is the second time I have seen that. The other switch I am still waiting for them to bring that one in so I can check it but I bet a factory reset will fix it also.
I did notice that the discovery is not working w/management vlan. no big deal.
That is the second time I have seen that. The other switch I am still waiting for them to bring that one in so I can check it but I bet a factory reset will fix it also.
I did notice that the discovery is not working w/management vlan. no big deal.
-
sirhc - Employee
- Posts: 7604
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1674 times
- Been thanked: 1358 times
Re: WS-8-250-DC Not passing vlan
jready wrote:That seems to have done the trick. That is strange as it was configured from scratch before. I had even deleted that vlan 20 & re-added it with a cold start.
That is the second time I have seen that. The other switch I am still waiting for them to bring that one in so I can check it but I bet a factory reset will fix it also.
I did notice that the discovery is not working w/management vlan. no big deal.
Try upgrading to v1.4.2 FINAL
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests