Path cost for Master/Backup link

Posts: 33
Joined: Thu Feb 21, 2019 6:56 pm
Has thanked: 0 time
Been thanked: 1 time

Path cost for Master/Backup link

Wed Sep 11, 2019 1:47 am


I can not use Netonix switchs to use a main path and a backup path.
No problem to do that with CISCO...

Today I replaced the CISCO by NETONIX but it does not work!
Which configuration should we use, do you have an example of production?

I tried the path cost on both ends switches : Master 200 and backup 300

If I disable the Master port on a switch the traffic does not fail over the backup, I lose the network...

User avatar
Posts: 670
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 84 times
Been thanked: 232 times

Re: Path cost for Master/Backup link

Thu Sep 12, 2019 7:45 am

We would need the stp output on all switch when you cut the master port.

Since main and backup link are between the same switch, you could also use a lower priority on the master.

Return to General Discussion

Who is online

Users browsing this forum: moya and 6 guests