Network Design VLANs Routers and such...

astuke
Member
 
Posts: 1
Joined: Fri May 24, 2019 2:41 pm
Has thanked: 0 time
Been thanked: 0 time

Network Design VLANs Routers and such...

Fri Jun 14, 2019 10:45 am

So I'd like to setup a ring between three locations. The Main Office will have Two AF24's that go straight out to the towers and an AF5 between the two towers. If one of the AF24 Links Goes down, I want to use the Connections between the towers to continue the loop. I ordered New Netonix Switches to put at all locations. Do you Route the AF ring, or put the Ring on one VLAN?

User avatar
Stephen
Employee
Employee
 
Posts: 271
Joined: Sun Dec 24, 2017 8:56 pm
Has thanked: 36 times
Been thanked: 45 times

Re: Network Design VLANs Routers and such...

Mon Jun 17, 2019 11:47 am

Are you referring to ERPS?

bdowne01
Member
 
Posts: 9
Joined: Thu Jul 07, 2016 3:01 pm
Has thanked: 0 time
Been thanked: 1 time

Re: Network Design VLANs Routers and such...

Tue Jul 09, 2019 6:08 pm

I would put a router at each tower site, use OSPF, and let it do it's thing. Do this stuff at Layer3. Having seen it done both ways, you're in a world of hurt if you try to do this all at Layer 2 & Spanning tree.

User avatar
mike99
Associate
Associate
 
Posts: 664
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 84 times
Been thanked: 228 times

Re: Network Design VLANs Routers and such...

Tue Jul 09, 2019 11:14 pm

Layer 2 is fine at small scale.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 8 guests