Mimosa Devices Overdrawing

MIMOSA™ is not associated with Netonix® in any way.
thewisp
Member
 
Posts: 8
Joined: Mon Apr 17, 2017 6:08 pm
Has thanked: 1 time
Been thanked: 1 time

Mimosa Devices Overdrawing

Mon Aug 22, 2022 12:46 pm

Hello All,
Thanks for your time.

We've got dozens of Netonix and Mimosa devices throughout the network. Today I discovered some odd power consumption from two Mimosa devices on the same site.

I've power cycled both, without any change. Anyone else run into this before?

Image
Image

thewisp
Member
 
Posts: 8
Joined: Mon Apr 17, 2017 6:08 pm
Has thanked: 1 time
Been thanked: 1 time

Re: Mimosa Devices Overdrawing

Mon Aug 22, 2022 3:38 pm

Oddly enough, I just had a tech swap ports 2 and 9. The issue did not follow the port. Nor did it follow the device.

The Mikrotik device in Ether2 is pulling it's expected 40W~.
The Mimosa B5c moved from Ether2 to Ether9 is pulling it's expected 12W~. Not the 80W~ it was pulling when plugged into Ether2.

However, Ether3 still reports an overdraw of watts.

Still no idea what to think of this. Image

thomas
Member
 
Posts: 40
Joined: Fri Jan 14, 2022 1:46 pm
Has thanked: 1 time
Been thanked: 4 times

Re: Mimosa Devices Overdrawing

Thu Sep 15, 2022 5:55 pm

looks like a blown current sensor, pretty easy fix if oyu know how to solder

User avatar
lligetfa
Associate
Associate
 
Posts: 1186
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 305 times
Been thanked: 381 times

Re: Mimosa Devices Overdrawing

Thu Sep 15, 2022 7:20 pm

I concur... it is a blown current sensor. Usual culprit is excess current from insufficient grounding (bonding).

Return to MIMOSA™

Who is online

Users browsing this forum: No registered users and 0 guests