Well, you've asked, we've answered.
You can now download this tool
Windows: Serial Recovery Tool v1.0.1
This automate's the process of recovering a switch via the serial port.
You just need to download the recovery.tar.gz file
Then the latest firmware
And finally select the COM port the switch exists at and click "start" at that point go grab some coffee, watch youtube or something. When you come back after about an hour the switch should be online.
**NOTE**: Make sure that no other program like HyperTerminal or PuTTY is using the Serial port otherwise the Recovery Tool won't be able to access the port.
Internally, it is really just following the same step's defined in the original instructions here so if for whatever reason you would rather recover manually you still can.
Here is what it looks like in action:
Hope this make's everyone's live's a bit easier - cheers.
RECOVERY TOOL VIA SERIAL FOR SWITCHES
-
sporkman - Member
- Posts: 86
- Joined: Mon Jul 27, 2015 7:03 pm
- Location: New York, NY
- Has thanked: 8 times
- Been thanked: 11 times
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Just FYI, there's a space at the beginning of the filename, not sure if that's intentional or not...
- cable guy
- Member
- Posts: 16
- Joined: Fri Nov 11, 2016 5:34 pm
- Location: British Columbia
- Has thanked: 2 times
- Been thanked: 0 time
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Most excellent and a big thank you
we'll try it on the same switch tomorrow and followup
Progress, good work![Thumbs Up :thumbsup:](./images/smilies/thumbsup.gif)
we'll try it on the same switch tomorrow and followup
Progress, good work
![Thumbs Up :thumbsup:](./images/smilies/thumbsup.gif)
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 17 times
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Any plans for a Linux version in the future? I can't be the only one who doesn't own (nor ever will again) a Windows computer.
- Lizard_Ranger
- Member
- Posts: 1
- Joined: Thu Nov 08, 2018 6:35 am
- Has thanked: 2 times
- Been thanked: 1 time
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
jpaine619 wrote:Any plans for a Linux version in the future? I can't be the only one who doesn't own (nor ever will again) a Windows computer.
Working with wine on mint
-
Stephen - Employee
- Posts: 974
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 77 times
- Been thanked: 170 times
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Actually, yes there are plans to release on Linux. We wanted to see how it worked out for everyone on windows first.
- wesley.kamau
- Member
- Posts: 1
- Joined: Tue Jun 12, 2018 5:19 am
- Has thanked: 1 time
- Been thanked: 0 time
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Great work!
Tried this on one of our switches. Been stuck on 'Begin transfer of recovery file .....
The .tar file is an archive not sure if that might have an effect on the process. When i unpack it, i get two files mtd and switch. My conclusion, either the switch is proper faulty or an issue with the .tar file.
Tried this on one of our switches. Been stuck on 'Begin transfer of recovery file .....
The .tar file is an archive not sure if that might have an effect on the process. When i unpack it, i get two files mtd and switch. My conclusion, either the switch is proper faulty or an issue with the .tar file.
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 17 times
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Stephen wrote:Actually, yes there are plans to release on Linux. We wanted to see how it worked out for everyone on windows first.
Awesome!
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 17 times
Re: RECOVERY TOOL VIA SERIAL FOR SWITCHES
Nitroxide wrote:Use virtualization
No thanks. That still requires one to use Windows. I will not provide Microsoft with any more money. Screw them. I'll stick with my "telemetry-free" OS.
Who is online
Users browsing this forum: No registered users and 49 guests