Feature Request - turn off poe based on voltage and time

commy
Member
 
Posts: 20
Joined: Tue Apr 04, 2017 3:43 pm
Has thanked: 4 times
Been thanked: 2 times

Feature Request - turn off poe based on voltage and time

Tue Feb 13, 2018 9:11 am

Hi,

Apologies if this not the proper place to post this request.
It is great to have such a good switch that can turn off the PoE at specific voltage and times - is it possible to provide an option that first checks if the voltage is below a predefined value and then consider the shutdown timers. This is required in the event that you have a solar site with 2 days no sunlight and the banks are getting low, to give the ability to start turning off ports based on time when it hits that lower voltage levels as a first measure.

Thank you

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Feature Request - turn off poe based on voltage and time

Tue Feb 13, 2018 9:25 am

This is already supported. :ak:

With the SMART DC switches (WS-8-150-DC - WS-12-250-DC - WS-26-500-DC)

LOOK ON THE POWER TAB

On all switches you can turn off and on POE based on time condition also on the Power TAB.

viewtopic.php?f=17&t=3415&p=22421&hilit=+power+voltage#p22421


Also make sure your running v1.4.9 firmware
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

commy
Member
 
Posts: 20
Joined: Tue Apr 04, 2017 3:43 pm
Has thanked: 4 times
Been thanked: 2 times

Re: Feature Request - turn off poe based on voltage and time

Mon Feb 26, 2018 8:57 pm

Hi,

Yes, but when we fill in the time condition - it always takes effect regardless of the voltage. We would like a toggle that makes it able to first check the voltage and then take into consideration the time ranges.

cbwecomm
Member
 
Posts: 13
Joined: Wed Oct 09, 2019 6:35 pm
Has thanked: 2 times
Been thanked: 4 times

Re: Feature Request - turn off poe based on voltage and time

Thu Jan 21, 2021 3:43 am

This would be a handy feature, for the same use case.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 28 guests