Compatible SFP Modules - FIRST POST IS COMPILED LIST

User avatar
StrataNet
Member
 
Posts: 28
Joined: Sun Nov 22, 2015 10:53 pm
Location: New Zealand
Has thanked: 5 times
Been thanked: 4 times

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Wed May 17, 2017 10:39 pm

Note my edit just now to the post above with two move working Fiberstore products.

Cheers!

Julian
 

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Thu May 18, 2017 7:30 am

good catch, edits don't always show unread. Have added to my post, will ask chris to propagate the change to 1st post. Thanks for testing!

User avatar
StrataNet
Member
 
Posts: 28
Joined: Sun Nov 22, 2015 10:53 pm
Location: New Zealand
Has thanked: 5 times
Been thanked: 4 times

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Thu May 18, 2017 4:57 pm

No problem! Glad that I could be of help. I feel that the firmware has gotten to a point where things just work now - great job!

User avatar
eomedia
Member
 
Posts: 46
Joined: Wed Jun 03, 2015 6:56 pm
Location: Aurora, CO
Has thanked: 5 times
Been thanked: 4 times

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Sat Aug 05, 2017 2:23 am

I tried to search the form to see if already posted, but could not find one so figured I'd go ahead and post the results of our testing with UBNT SFP modules

UF-SM-1G-S - NO

UF-MM-1G - YES

Julian
 

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Sat Aug 05, 2017 9:21 am

thanks, I will add them to the list!

User avatar
ColoCenter
Member
 
Posts: 16
Joined: Tue Sep 29, 2015 2:11 pm
Location: Netherlands
Has thanked: 2 times
Been thanked: 3 times

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Mon Sep 11, 2017 1:28 pm

Got a UF-SM-1G-S working today in a WS-12-250-AC running firmware 1.4.7. Connection was to an UBNT edgeswitch 10G. Link came up fine.

aspen
Member
 
Posts: 2
Joined: Sat Jan 16, 2016 4:46 am
Has thanked: 1 time
Been thanked: 0 time

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Tue Sep 12, 2017 1:33 pm

Thought I'd mention that 10G Direct Attach Cables work in the WS-12-250-AC. We connected it to a mikrotik CCR1009 and it works great!

I don't remember if I had to set the speed manually in the switch (it shows as 1G), but on the mikrotik side it is plugged into a 1G sfp port with auto negotiation enabled. Been running for about a year or so without issue.

Specific product:
MW-S+DA0003 - Maxxwave SFP+ Direct Attach Passive Fiber Cable

edit:
Also just hooked up a fs.com SFP-10G-DAC to a WS-10-250-AC and a CCR1072 10G port. I had disable auto negotiation and set it to 1G full.

User avatar
jpaine619
Member
 
Posts: 80
Joined: Fri Jul 07, 2017 11:13 pm
Location: San Diego, CA
Has thanked: 26 times
Been thanked: 17 times

Re: Compatible SFP Modules

Thu Feb 08, 2018 5:51 am

sirhc wrote:We are using a ton of generic Cisco compatible 1G copper SFP modules we purchased off Amazon and New egg and they all work fine.


Can you be more specific? (i.e. links and/or part #'s)

Ludvik
Experienced Member
 
Posts: 105
Joined: Tue Nov 08, 2016 1:50 pm
Has thanked: 15 times
Been thanked: 15 times

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Tue Jul 10, 2018 7:45 pm

Working: GigaLight GE-GB-P1RC & GE-GB-P3RC (gigabit RJ45 SFP)

scyph3r
Member
 
Posts: 1
Joined: Thu Nov 09, 2017 3:12 pm
Has thanked: 0 time
Been thanked: 1 time

Re: Compatible SFP Modules - FIRST POST IS COMPILED LIST

Thu Aug 23, 2018 12:57 pm

Just hooked up a WS-12-250-AC(Firmware 1.5.0) to a mikrotik CRS 226 with Addon J9142B-AO and J9143B-AO. Had some initial problems at first but it was on the mikrotik side (in case anyone runs into this, mikrotik has 2 different types of sfp+ ports. Some are labeled sfpplus, and some are labeled sfp-sfpplus. Sfp-sfpplus is the only one that is backwards compatible with non sfp+ modules.) so I also used a Maxxwave MW-UTP-G-US and it linked up as well.

PreviousNext
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 29 guests