Netonix Forums

We have a netAlly Linkrunner G2 tester which among other things will report back POE statistics of a Port. However it does not seem to work with Netonix switches. I get Layer 3 and it passes traffic, but it says POE not detected with the Netonix set to 24v, 48v or 48vh. I've never had this issue with any other switch, just Netonix.

I don't have one of those testers but a quick look at the manual says there is an "Injector" option setting which sounds like it is used to ignore IEEE PoE handshaking. Are you using that mode and / or have you tested other non 802.xx passive PoE switches like the Netonix?