readCurrent error

SERVIRED
Member
 
Posts: 7
Joined: Tue Dec 11, 2018 12:41 am
Has thanked: 0 time
Been thanked: 0 time

readCurrent error

Thu Jun 02, 2022 12:56 pm

some solution to the error this morning the batteries were discharged and the switch sends this message


readCurrent g_i2c_error occurred


Image
[img]<a%20href='https://postimages.org/'%20target='_blank'><img%20src='https://i.postimg.cc/W3V2nPrM/Captura-de-Pantalla-2022-06-02-a-la-s-11-34-36-a-m.png'%20border='0'%20alt='Captura-de-Pantalla-2022-06-02-a-la-s-11-34-36-a-m'/></a><br%20/><a%20href='https://postimages.org/es/'>avatar%20para%20foros</a><br%20/>[/img]


Image

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: readCurrent error

Sun Jun 05, 2022 10:41 am

Seems like broken sensor.

thomas
Member
 
Posts: 40
Joined: Fri Jan 14, 2022 1:46 pm
Has thanked: 1 time
Been thanked: 4 times

Re: readCurrent error

Mon Jun 06, 2022 5:55 pm

definitely a hardware issue. if netonix won't fix it, I will.

SERVIRED
Member
 
Posts: 7
Joined: Tue Dec 11, 2018 12:41 am
Has thanked: 0 time
Been thanked: 0 time

Re: readCurrent error

Wed Jun 08, 2022 1:20 am

mike99 wrote:Seems like broken sensor.


No broken sensor, it was resolved by removing the CD power supply, it is not enough to restart, you have to physically go to the area and do it manually, perhaps they can replicate it in laboratories with this is the second equipment in all my infrastructure that suffers from this.


same computer after physical shutdown:


Image

Image

thomas
Member
 
Posts: 40
Joined: Fri Jan 14, 2022 1:46 pm
Has thanked: 1 time
Been thanked: 4 times

Re: readCurrent error

Wed Jun 08, 2022 10:36 am

did you replace the DC power supply or simply unplug the i2c connector and plug it back in again? can't see how the latter would fix that unless it was a pinched cable shorting the i2c lines out, I was convinced it was a faulty i2c chip on either the board or the psu.

SERVIRED
Member
 
Posts: 7
Joined: Tue Dec 11, 2018 12:41 am
Has thanked: 0 time
Been thanked: 0 time

Re: readCurrent error

Fri Jun 24, 2022 5:44 pm

thomas wrote:did you replace the DC power supply or simply unplug the i2c connector and plug it back in again? can't see how the latter would fix that unless it was a pinched cable shorting the i2c lines out, I was convinced it was a faulty i2c chip on either the board or the psu.



physically disconnected the positive cable from the switch terminal and everything returned to normal, it is not worth turning off the equipment via remote, this does not solve anything.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 28 guests