More power

rclark
Member
 
Posts: 16
Joined: Mon Jun 19, 2017 1:06 pm
Has thanked: 2 times
Been thanked: 2 times

More power

Sat Dec 25, 2021 3:45 pm

We have a site that has to be powered via POE. It has 2 wisp mini switches and 6 radios. We need about 85 watts of power. I found a 90 watt POE injector but it requires an active poe protocol. Does anyone know where we can lay our hands on a 90 watt passive poe injector?

Thanks

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: More power

Mon Dec 27, 2021 10:54 pm

If you need 85W, 90W poser supply could be too short.

if you have 2 wisp mini switch does it mean 42.5W by switch ? If so, why not use 2 passive PoE ?

rclark
Member
 
Posts: 16
Joined: Mon Jun 19, 2017 1:06 pm
Has thanked: 2 times
Been thanked: 2 times

Re: More power

Wed Dec 29, 2021 8:01 pm

The switches are about 250 feet from the building and we only ran a single cable in the liquid-tight. Since the initial installation we have been adding radios and now have 6 on that tower.

We may be forced to try to get a second ethernet cable into the liquid-tight...

Would one of these https://www.tyconsystems.com/poe-injsplt-g work? It puts power on all 4 pairs.

User avatar
lligetfa
Associate
Associate
 
Posts: 1186
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 305 times
Been thanked: 381 times

Re: More power

Wed Dec 29, 2021 10:48 pm

That Tycon does not include any power supply. I was looking at https://tsi.tyconsystems.com/doc/SpecSh ... _Sheet.pdf but it has different polarity but ISTR reading that the WS6 has a diode bridge on its input. I posed the question to Dave so maybe he can clarify.

User avatar
Dave
Employee
Employee
 
Posts: 723
Joined: Tue Apr 08, 2014 6:28 pm
Has thanked: 1 time
Been thanked: 158 times

Re: More power

Thu Dec 30, 2021 9:22 am

yes, the ws6 mini does have a bridge rectifier on its POE input power channel, so in theory you could use any POE combination pair source....

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 18 guests