Changing IP address

abatie
Member
 
Posts: 6
Joined: Fri Mar 26, 2021 5:16 pm
Has thanked: 0 time
Been thanked: 1 time

Changing IP address

Thu Jul 15, 2021 7:20 pm

I'm trying to move a WS-26-500-DC from the default ip address to one on our management vlan. The MAC Table shows that it is talking on that vlan ok:

Screen Shot 2021-07-15 at 4.20.32 PM.png
MAC Table


however, when I configure the Device address onto that network, connectivity is lost, its address never responds to pings from a directly connected device and the config reverts back to 192.168.1.20 after the timeout. The same behavior whether using port 1 or port 10...

VLAN config:

Screen Shot 2021-07-15 at 4.20.56 PM.png
VLAN Configuration

User avatar
Stephen
Employee
Employee
 
Posts: 965
Joined: Sun Dec 24, 2017 8:56 pm
Has thanked: 77 times
Been thanked: 169 times

Re: Changing IP address

Thu Jul 15, 2021 8:24 pm

Easiest way around this from what you've described would likely be to just use a console cable and update the IP via the CLI.

wyocom
Member
 
Posts: 1
Joined: Mon Feb 07, 2022 5:28 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Changing IP address

Mon May 09, 2022 4:38 pm

After entering conf t mode I entered revert timer 180 and it gave me the time I needed. The problem I had is it would ping 2x and then loose accessibility for another 30 seconds and then revert.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 26 guests