SNMPv2 Support

Post a reply
frank
 

SNMPv2 Support

Thu Apr 23, 2015 6:04 pm

Hi,

Which WISP switch firmware version supports SNMPv2 / SNMPv2c ?. I am using version v1.1.5 which has SNMP v1.


- Frank
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1318 times

Re: SNMPv2 Support

Thu Apr 23, 2015 6:18 pm

frank wrote:Hi,

Which WISP switch firmware version supports SNMPv2 / SNMPv2c ?. I am using version v1.1.5 which has SNMP v1.


- Frank


you can read the release notes in the firmware download thread. viewtopic.php?f=17&t=240

Start at the last page and read up, no sense reading about early release stuff
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
frank
 

Re: SNMPv2 Support

Wed Apr 29, 2015 11:25 am

After upgrading the WISP switch vo v1.2CR11, I can confirm that SNMPv2 is working for GET operation. However, I found the following issues.

1. SNMP get on the firmware revision returns unwanted result.

NETONIX-SWITCH-MIB::firmwareVersion.0 = Wrong Type (should be OCTET STRING): INTEGER: 1649569185

2. Couldn't see any SNMP trap raised from the WISP switch.

3. Couldn't find any option to set the SNMP trap server IP address.
Top
User avatar
Eric Stern
Employee
Employee
 
Posts: 532
Joined: Wed Apr 09, 2014 9:41 pm
Location: Toronto, Ontario
Has thanked: 0 time
Been thanked: 130 times

Re: SNMPv2 Support

Wed Apr 29, 2015 11:46 am

I'll make a note to fix the firmware version type in the MIB.

SNMP traps are not supported at this time.
Top
Post a reply
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 114 guests