switch-switch = no "pass thru"

jdejansb
Member
 
Posts: 6
Joined: Mon Oct 16, 2017 3:38 pm
Has thanked: 1 time
Been thanked: 1 time

switch-switch = no "pass thru"

Wed Sep 09, 2020 7:26 pm

Hi,

We have a strange situation... Wanted to change one of the WS-12-250-AC switches since we've noticed speed drops on two ports (1gig->100megs, then back, and then drops again) and we already have one bad port. So, installed a brand new one - we were not able to reach any of the devices connected to the new switch!!! We had to put back the old one - it's working (still with two ports speed drops/changes).

Thought the new switch was bad - tech guy went the next day with another new switch and the same thing happened!?!

So, wanted to test the new switch - connected to one of the spare (free) ports on the old switch and we were able to reach it... then, unplugged one of the devices (AP with still no customers on it) from the old and connected to the new switch - not reachable!

Help? :-)


Thanks,
Dejan J.
Last edited by jdejansb on Wed Sep 09, 2020 7:52 pm, edited 1 time in total.

jdejansb
Member
 
Posts: 6
Joined: Mon Oct 16, 2017 3:38 pm
Has thanked: 1 time
Been thanked: 1 time

Re: switch-switch = no "pass thru"

Wed Sep 09, 2020 7:28 pm

From the new switch I can reach the AP attached (pings, ssh, ...) but not from the old switch nor the rest of the network... Yet, the new switch is reachable (from the rest of the network)...

jdejansb
Member
 
Posts: 6
Joined: Mon Oct 16, 2017 3:38 pm
Has thanked: 1 time
Been thanked: 1 time

Re: switch-switch = no "pass thru"

Wed Sep 09, 2020 7:51 pm

Oh, I got it ... it's couple of new switches with preloaded 1.5.5 - did the update to 1.5.5 and now it's working !!! :-)

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 33 guests