cmdline poe control

anders
Member
 
Posts: 1
Joined: Thu Sep 26, 2019 2:47 pm
Has thanked: 0 time
Been thanked: 0 time

cmdline poe control

Thu Sep 26, 2019 4:20 pm

I am looking for a way to control the POE of a port using cmdline. basically I want to set a crontab that looks at board temperature and turns a port on if it gets hot (powers a boxfan). I have tried netonixctl and this is what I get.

Code: Select all
 netonixctl -v --poe 6=24v
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
using 24 bits
setting clock 26 load 27 data 25 reset 28 data_out 23
using bitstring '000000000010000000000000'
0 read 0
1 read 0
2 read 0
3 read 0
4 read 0
5 read 1
data in registers doesn't match the data we sent
netonixctl[2681]: Unable to set PoE after 10 attempts

 

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 36 guests