Hello
Today I had a strange problem between the unit to enable turn on a POE and change traffic to another link after I was applying the switch the switch was left without access to the administration ie nothing passed data
I am not staying in Other than to travel 10 kilometers and climb the mountain to disconnect and connect to the Netonix DC Energy and after that went up All normal
Netonix can not return correctly to the previous configuration ie it seems that part is not working well or needs to improve that option
Model of the equipment that I use WS-12-250-DC
Firmware version 1.5.2
There is no access to the Netonix Administration, it does no
-
Stephen - Employee
- Posts: 966
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 77 times
- Been thanked: 169 times
Re: There is no access to the Netonix Administration, it doe
Can you ping the switch?
Re: There is no access to the Netonix Administration, it doe
I did not have a ping It was necessary the restart completed by removing the power to return to work and have access and ping
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: There is no access to the Netonix Administration, it doe
Are you using SFP modules?
What is the Revert timer set to on the Device/Configuration TAB?
Before power cycling it did you happen to console into it and see what was going on?
What is the Revert timer set to on the Device/Configuration TAB?
Before power cycling it did you happen to console into it and see what was going on?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: There is no access to the Netonix Administration, it doe
sirhc wrote:Are you using SFP modules?
What is the Revert timer set to on the Device/Configuration TAB?
Before power cycling it did you happen to console into it and see what was going on?
No SFP modules.
The timer is in 300 seconds.
Did not connect to the unit before power cycling.
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: There is no access to the Netonix Administration, it doe
As far as the revert function Stephen will test it to verify still working.
Curious, is the unit is hooked "DIRECTLY" to batteries or hooked to charging unit/power supply?
Curious, is the unit is hooked "DIRECTLY" to batteries or hooked to charging unit/power supply?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: There is no access to the Netonix Administration, it doe
Yes The unit is connected directly to the batteries together with the solar controller
-
Stephen - Employee
- Posts: 966
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 77 times
- Been thanked: 169 times
Re: There is no access to the Netonix Administration, it doe
I've tested the revert function and it appears to be working still. The way I triggered it on my end is I made a change and before it completed I pulled the network cable so that the UI could no longer see it, and plugged it back in when it began the revert. Which worked just fine. Can you tell me specifically what ports where being changed? Also is it possible you could have had a network interruption on your machine during this time? If access to the switch from the UI (on the computer that has the switch opened in the browser) was lost and didn't come back in time to catch the reversion it may have caused this. Either way, more details will be helpful.
Re: There is no access to the Netonix Administration, it doe
The changes made were the following
Note Both link 1 and link 2 have 10% communication
Enable LAN to port 2
Disable the LAN in Port 1
Added a vLAN look PHOTO
After these changes, the team lost communication and did not return to the previous configuration
Even if you had some momentary error in the order applying the changes you should have returned to the previous configuration before the changes
Note Both link 1 and link 2 have 10% communication
Enable LAN to port 2
Disable the LAN in Port 1
Added a vLAN look PHOTO
After these changes, the team lost communication and did not return to the previous configuration
Even if you had some momentary error in the order applying the changes you should have returned to the previous configuration before the changes
- Attachments
-
-
-
Stephen - Employee
- Posts: 966
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 77 times
- Been thanked: 169 times
Re: There is no access to the Netonix Administration, it doe
OK so it looks like there are no sfp ports plugged in, and port 4 is disabled. So you only have access to the management vlan via port 1.
When you say
"Disable the LAN in Port 1"
Do you mean you disabled port 1?
When you say
"Disable the LAN in Port 1"
Do you mean you disabled port 1?
Who is online
Users browsing this forum: Google [Bot] and 17 guests