IgniteNet ML-60-10G-360 PoE?

User avatar
Kevlar
Member
 
Posts: 5
Joined: Mon Oct 19, 2015 5:22 pm
Location: Sonoma County, CA
Has thanked: 1 time
Been thanked: 0 time

IgniteNet ML-60-10G-360 PoE?

Wed Jun 05, 2019 5:12 pm

Can anyone confirm whether it's safe to power an IgniteNet MetroLinq 10G Tri-Band Omni ( ML-60-10G-360 ) from a Netonix?

The included PoE brick outputs 48VDC / 1.35A, and the pin-out is +(1,2)pins / -(3,6)pins. This is reversed polarity from some other radios we've powered with Netonix 48V PoE, and also higher amperage than the Netonix can sustain (the Netonix 48V PoE setting says 0.75A, though I know it can surge/spike a bit higher than that).

I see another IgniteNet MetroLinq model listed as working in this thread, but that one takes 24VH PoE. I know some radios work with either polarity, but haven't found anything conclusive on this model. Has anyone tested an ML-60-10G-360 with Netonix 48V PoE?

User avatar
Dawizman
Experienced Member
 
Posts: 138
Joined: Fri Jul 03, 2015 4:11 pm
Location: Cold Lake, AB - CANADA
Has thanked: 13 times
Been thanked: 22 times

Re: IgniteNet ML-60-10G-360 PoE?

Wed Jun 05, 2019 11:21 pm

48VH works. The Pinout on those radios is 1,2,4,5+ and 3,6,7,8- if i am not mistaken.

User avatar
Kevlar
Member
 
Posts: 5
Joined: Mon Oct 19, 2015 5:22 pm
Location: Sonoma County, CA
Has thanked: 1 time
Been thanked: 0 time

Re: IgniteNet ML-60-10G-360 PoE?

Thu Jun 06, 2019 4:06 pm

Dawizman wrote:48VH works. The Pinout on those radios is 1,2,4,5+ and 3,6,7,8- if i am not mistaken.

Thanks for the reply.

Makes me a little nervous to give it 48VH, since the PoE brick it shipped with says it has power on 2 pairs, not all 4. I take it you've tested 48VH with this exact model though?

Sure wish the manufacturer's spec sheet would give a little more detail, but it makes no mention of the pin-out / polarity options, so I'm just going off what it says on the brick.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: IgniteNet ML-60-10G-360 PoE?

Thu Jun 06, 2019 4:33 pm

Take a jumper and cut one end off.
Now strip all 8 wires
Now use multi-meter / volt meter to measure pairs yourself and note results thus mapping out the pairs
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

ukiahwireless2011
Member
 
Posts: 1
Joined: Mon Jul 10, 2017 12:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: IgniteNet ML-60-10G-360 PoE?

Tue Jul 13, 2021 10:09 pm

Has anyone actually powered a ml60-10g-360 with 48vh from netonix? Nobody actually answered this question. we are seeing connectivity issues at 48v as power is much less than factory poe.

Return to General Discussion

Who is online

Users browsing this forum: Google [Bot] and 16 guests