Netonix Forums

Ahhhh ... Found some oooold hacker links that should help:

http://community.ubnt.com/t5/Getting-St ... 9340#M2259

http://dren.dk/pics/ubnt-m-reset/poe-24-schematic.jpeg

JustJoe wrote:Which leads me to ask, would there be conflicts with that and the way the previous orange and green pairs are now powered with a 24VH setup?

There was mention over on UBNT that any kit designed to remote reset via voltage on the additional data pairs would be reset if connected to a 24VH PoE. I cannot say if doing so could inflict permanent damage. I would advise not to use 24VH for that purpose unless you can live with the possible consequences.

lligetfa wrote:

JustJoe wrote:Which leads me to ask, would there be conflicts with that and the way the previous orange and green pairs are now powered with a 24VH setup?

There was mention over on UBNT that any kit designed to remote reset via voltage on the additional data pairs would be reset if connected to a 24VH PoE. I cannot say if doing so could inflict permanent damage. I would advise not to use 24VH for that purpose unless you can live with the possible consequences.

Not sure but will LAB it soon and report back but yes the user should not select 24VH as the port POE option if the device only needs 24V the same way that they should not plug a 24V airMAX M5 Rocket into a 48V airMAX Titanium M5 Rocket POE brick. They will plug into each other but there is only so much idiot proofing a manufacturer can do.

sirhc wrote:Read this post: http://forum.netonix.com/viewtopic.php? ... tory#p2398

This link also does not work


SQL ERROR [ mysql4 ]
mysql_connect function does not exist, is mysql extension installed? []
An sql error occurred while fetching this page. Please contact an administrator if this problem persists.