Question about the power tab in the dc switch GUI

mark
Member
 
Posts: 9
Joined: Wed Aug 10, 2016 5:44 am
Has thanked: 1 time
Been thanked: 1 time

Question about the power tab in the dc switch GUI

Wed Apr 10, 2019 8:21 am

Hello,

In the netonix wisp dc switch GUI under the power tab, there are some box that can be ticked for each port, does anyone know what they are for?

Kind regards.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Question about the power tab in the dc switch GUI

Wed Apr 10, 2019 9:51 am

The Power TAB does differnt things for differnt models.

Maybe specify your model and post up a screen shot showing the fields your asking about.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

mark
Member
 
Posts: 9
Joined: Wed Aug 10, 2016 5:44 am
Has thanked: 1 time
Been thanked: 1 time

Re: Question about the power tab in the dc switch GUI

Wed Apr 10, 2019 10:31 am

The model is WS-8-150-DC.
Attachments
Capture+_2019-04-08-22-18-52.png

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Question about the power tab in the dc switch GUI

Wed Apr 10, 2019 11:10 am

OK so those check boxes are present on all TABs with port configurations.

If you select any of those boxes a new line/row appears at the top then any change in that NEW line/row will be applied to all ports/row with that check box checked.

If you select the box at the top of that column it selects all ports then you can deselect individual ports.

This is explained in our video tutorial here:
https://www.youtube.com/watch?v=8JvBEAD4MFM

And there are several posts on this such as this one:
https://forum.netonix.com/viewtopic.php?f=6&t=5137&p=28542&hilit=+port+row#p28542

I used ADVANCED search and looked for "+port +row" author "sirhc" and the above post was the second post.

If you are new to our switches one should set one on the bench and play with the UI and CLI for bit to familiarize themselves with the switch before putting any in service.

Also one should read all the ANNOUCEMNET POSTS at the top of the WISP SWITCH/GENERAL DISCUSSION and WISP SWITCH/HARDWARE AND SOFTWARE ISSUES forums. Announcement posts have the bullhorn logo to the left.

We made the UI/CLI pretty simple and if one simply plays with it such as in this case selected a couple of those ports they would see the line appear at the top and should be able to figure it out.

Spend time hovering the mouse over all input fields and look for help balloon pop ups.

Like I said many times, spend an hour playing with it before using it and if you have any questions first use the search feature on the forums and if that fails then ask but it really is pretty simple UI and CLI.

The CLI has inline help by pressing "?" and enter and it will display a list of commands available to where you are in the CLI just like Cisco CLI.

Also in the CLI if you type a partial command and then "?" and ENTER it shows you options to complete the command.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Question about the power tab in the dc switch GUI

Wed Apr 10, 2019 11:16 am

A side note, use the Print Screen key on your keyboard then insert/paste into something like MS PAINT and edit the graphic file rather then take a picture with your phone then edit it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

mark
Member
 
Posts: 9
Joined: Wed Aug 10, 2016 5:44 am
Has thanked: 1 time
Been thanked: 1 time

Re: Question about the power tab in the dc switch GUI

Thu Apr 11, 2019 3:46 am

Ok thank you very much!

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 20 guests