Netonix 12-250-DC CAD Drawings?

danclark
Member
 
Posts: 10
Joined: Wed Apr 19, 2017 4:41 am
Has thanked: 1 time
Been thanked: 8 times

Netonix 12-250-DC CAD Drawings?

Thu Aug 23, 2018 1:11 am

Hey Guys, we use your switches extensively now throughout our 2-way radio and microwave networks for back-haul managed switches.
They are great, keep up the awesome work!

We are currently finishing up another microwave project and we have been sorting out documentation, I'm wondering if there is any CAD drawings available for the front of the switch? We incorporate these drawings in our rack setups etc so actual CAD drawings are always nicer to pull into a rack drawing as they scale nicely.

Cheers
Dan

kiwibrew
Member
 
Posts: 7
Joined: Mon May 02, 2016 8:09 pm
Has thanked: 3 times
Been thanked: 0 time

Re: Netonix 12-250-DC CAD Drawings?

Sun Apr 07, 2019 12:22 am

I'd like to see CAD drawings for the smaller WS range. 8-150-DC and 12-250-DC in particular. Really need these to help in small enclosure planning. Where are the through holes located, where are the fans located, etc..

User avatar
totalhighspeed
Member
 
Posts: 8
Joined: Fri Oct 23, 2015 11:30 am
Location: Nixa, MO
Has thanked: 2 times
Been thanked: 3 times

Re: Netonix 12-250-DC CAD Drawings?

Thu Apr 25, 2019 2:53 pm

If possible I'd like to get models for WS-6-MINI as well. We're using Fusion360 to model and plan out our relay boxes and this would make things a lot easier for us. I wouldn't have to create simple block models from measurements, we'd actually have a model to use.

I don't see any reasons why you couldn't make these available, it's not like we're going to go out and start making our own switches. :tinhat:

mattorola7
Member
 
Posts: 1
Joined: Fri Aug 05, 2016 9:12 am
Has thanked: 0 time
Been thanked: 0 time

Re: Netonix 12-250-DC CAD Drawings?

Tue Dec 03, 2019 10:58 am

Bumping this thread to see if CAD drawings are available? We also are in the process of planning out our boxes in Autodesk and Fusion 360.

mark.mcclure@syngenta.com
Member
 
Posts: 1
Joined: Fri Aug 25, 2023 11:45 am
Has thanked: 1 time
Been thanked: 0 time

Re: Netonix 12-250-DC CAD Drawings?

Fri Aug 25, 2023 11:48 am

I would also like drawings for the WS-12-250-DC and the din bracket din-8-10-12. Please email STEP/IGS, or similar 3d format. thanks

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 25 guests