Page 1 of 1

How do i see SFP DDM (DOM) information ?

Posted: Wed Jun 13, 2018 6:02 am
by jjonsson
Is it possible to see DDM (DOM) information on a Netonix switch ?
I have got some new SFPs from FS.COM which is not working. I have tried different settings regarding speed/duplex. On my EdgeRouter I get the DOM information with this command:
Code: Select all
show interfaces ethernet eth7 sfp
connector=LC
vendor=Fiberstore
oui=00-00-00
part=SFP1G-SX-85
rev=
serial=F166CXXXXXX
date=160607
temp=34.433 C
voltage=3.23 V
current=3.67 mA
tx_power=0.24 mW
rx_power=0.37 mW
tx_fault=no
rx_los=no

Re: How do i see SFP DDM (DOM) information ?

Posted: Wed Jun 13, 2018 8:15 am
by mike99