DHCP Snooping

User avatar
jjonsson
Associate
Associate
 
Posts: 337
Joined: Wed Nov 05, 2014 12:30 pm
Location: Denmark
Has thanked: 37 times
Been thanked: 65 times

DHCP Snooping

Tue Dec 05, 2017 11:11 am

Maybe a stupid question, but how and where do I configure DHCP Snooping ?

TorbenRyttersgaard
Member
 
Posts: 2
Joined: Wed Mar 01, 2017 11:54 am
Has thanked: 0 time
Been thanked: 0 time

Re: DHCP Snooping

Tue Dec 05, 2017 11:29 am

It is the DS fields under Ports tab.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: DHCP Snooping

Tue Dec 05, 2017 11:34 am

Read this post, not really any config just enable per port
http://forum.netonix.com/viewtopic.php? ... ping#p8168

Also there were fixes to DHCP snooping in v1.4.8 - reference release notes

v1.4.8 wrote:NOTE: IGMP snooping over VLANS, MSTP, and ERPS are still being developed so use these features at your own risk.

FIXED/CHANGED
- Fixed input voltage reading on SMART DC models that may cause false input reading if voltage momentarily drop
- Fixed Changed temp sensor readings on SMART DC models to effect fan speeds
- Fixed SNMP support for Q-SWITCH-MIB, LLDP and CDP
- Fixed IGMP snooping with multiple VLANs
- Fixed DC calibration restarting POE
- Fixed problem with DHCP snooping affecting fragmented UDP packets <========== HERE
- Fixed problem with ERPS enabling forwarding a failed port
- Fixed problem with MSTP setting priority and path cost
- Fixed SSH login with RADIUS when the password contains special characters
- Fixed scheduled port bounce
- Fixed VLAN drag/drop being too sensitive
- Fixed MSTP root message
- Fixed QoS CLI configuration
- Fixed VLAN drag/drop being too sensitive
- Grey out unavailable bulk poe options
- Upper out of voltage range for IDC is now 54V

ENHANCEMENTS
- Added ERPS protocol implementation is g.8032v2 - Ring Protection
- Added BETA note to ERPS
- Added port name to "show interface status" CLI command
- Added an input voltage calibration for DC models
- Improved Q-BRIDGE-MIB support
- Improved fan control on DC models
- Improved stability of ERPS
- Added "Enable Power" action to watchdog
- Added ifMtu to IF-MIB
- Added dot3StatsDuplexStatus from EtherLike-MIB
- Added the time counters were cleared to port detail
- Added watchdog description to email notification
- Added terminal length option to CLI
- Added ability to re-order VLANs using drag and drop
- Enabled IGMP proxy for IGMP snooping
- Added "show igmp" CLI command

KNOWN ISSUES
- Some language templates need help - please private message Eric Stern to help
- IGMP snooping over VLANS, MSTP, and ERPS are still being developed

Released 11/16/2017
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
jjonsson
Associate
Associate
 
Posts: 337
Joined: Wed Nov 05, 2014 12:30 pm
Location: Denmark
Has thanked: 37 times
Been thanked: 65 times

Re: DHCP Snooping

Tue Dec 05, 2017 5:58 pm

Thanks...

I'll have to test it out....

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 25 guests