Netonix Forums

Brand new owner of a WS-12-250-AC and I'm curious if anyone else powers a Mikrotik NetMetal5 and what PoE settings they use. I believe the setting should be 24V, but since I'm new to the whole WISP switch thing, just looking for some confirmation. I found settings for the rest of the radio's we use with the switch on the forums with a little searching, but could find nothing on Mikrotik units.

Cheers!

You must look at the device spec, pssive PoE 8v to 30v.
https://mikrotik.com/product/RB922UAGS-5HPacT-NM

So 24V (not VH).

Good stuff, thanks guys! Will read through it all.