NetMetal5 PoE Settings

Baynn
Member
 
Posts: 6
Joined: Sat Nov 25, 2017 7:52 pm
Has thanked: 0 time
Been thanked: 0 time

NetMetal5 PoE Settings

Sun Nov 26, 2017 12:58 pm

Brand new owner of a WS-12-250-AC and I'm curious if anyone else powers a Mikrotik NetMetal5 and what PoE settings they use. I believe the setting should be 24V, but since I'm new to the whole WISP switch thing, just looking for some confirmation. I found settings for the rest of the radio's we use with the switch on the forums with a little searching, but could find nothing on Mikrotik units.

Cheers!

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: NetMetal5 PoE Settings

Sun Nov 26, 2017 2:31 pm

You must look at the device spec, pssive PoE 8v to 30v.
https://mikrotik.com/product/RB922UAGS-5HPacT-NM

So 24V (not VH).

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: NetMetal5 PoE Settings

Sun Nov 26, 2017 2:34 pm

Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

Baynn
Member
 
Posts: 6
Joined: Sat Nov 25, 2017 7:52 pm
Has thanked: 0 time
Been thanked: 0 time

Re: NetMetal5 PoE Settings

Sun Nov 26, 2017 3:12 pm

Good stuff, thanks guys! Will read through it all.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 32 guests