Separate Ports

kurlec
Member
 
Posts: 1
Joined: Wed Nov 15, 2017 3:53 am
Has thanked: 0 time
Been thanked: 0 time

Separate Ports

Wed Nov 22, 2017 2:51 am

Hi guys

I need to know how it would be possible for me to link only port 1 and sfp port 1 then port 2 and sfp port 2, reason for this would be i want to use port 1 and sfp1 for incomming internet traffic and port 2 and sfp2 for outgoing internet traffic but they should not communicate with each other. would this be possible on this? usualy on a mikrotik i would just create 2 bridges but im new to WS netonix switches. Also would this WS-10 48VH switch be able to a SIAEMic radio?

Julian
 

Re: Separate Ports

Wed Nov 22, 2017 11:18 am

Sounds like you want to use internal VLANs.

Bear in mind that your switch's management IP will only respond on the VLAN at the top of the list, but if I'm managing the switch from the inbound port, it'll look something like this:

Untitled.png


Note that all other ports other than the ones you listed will be disabled in this configuration.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 28 guests