New root on port
Posted: Thu Aug 10, 2017 4:41 pm
Hello forum,
I've been using the Netonix 12-250 DC for a few months and noticed in the logs today a lot of these:
Jun 15 16:15:22 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 17:05:31 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:10:52 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:11:02 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:28:29 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:28:59 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:16:27 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:16:45 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:17:01 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:17:07 STP: MSTI0: New root on port 12, root path cost is 400104
I've also notice that the CPU is running around 50%. Neither of these things look right. Is there a way to run diagnostics on this machine to try to figure out if some underlying factor is set up wrong?
On another switch, there is a lot of this going on... These logs seem like something isn't quite right...
Jun 26 18:13:39 STP: set port 10 to learning
Jun 26 18:13:39 STP: set port 10 to forwarding
Jun 26 18:14:08 STP: set port 10 to discarding
Jun 26 18:14:08 STP: set port 10 to learning
Jun 26 18:14:08 STP: set port 10 to forwarding
Jun 26 18:16:28 STP: set port 10 to discarding
Jun 26 18:16:28 STP: set port 10 to learning
Jun 26 18:16:28 STP: set port 10 to forwarding
Jun 26 18:20:03 STP: set port 10 to discarding
Jun 26 18:20:03 STP: set port 10 to learning
Jun 26 18:20:03 STP: set port 10 to forwarding
Jun 26 18:20:32 STP: set port 10 to discarding
Jun 26 18:20:32 STP: set port 10 to learning
Jun 26 18:20:32 STP: set port 10 to forwarding
Jun 26 18:42:52 STP: set port 10 to discarding
Jun 26 18:42:52 STP: set port 10 to learning
Jun 26 18:42:52 STP: set port 10 to forwarding
Jun 26 20:54:49 STP: set port 10 to discarding
Jun 26 20:54:49 STP: set port 10 to learning
Jun 26 20:54:49 STP: set port 10 to forwarding
Jun 27 15:03:15 STP: set port 10 to discarding
Thanks,
AK
I've been using the Netonix 12-250 DC for a few months and noticed in the logs today a lot of these:
Jun 15 16:15:22 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 17:05:31 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:10:52 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:11:02 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:28:29 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 15 18:28:59 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:16:27 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:16:45 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:17:01 STP: MSTI0: New root on port 12, root path cost is 400104
Jun 16 07:17:07 STP: MSTI0: New root on port 12, root path cost is 400104
I've also notice that the CPU is running around 50%. Neither of these things look right. Is there a way to run diagnostics on this machine to try to figure out if some underlying factor is set up wrong?
On another switch, there is a lot of this going on... These logs seem like something isn't quite right...
Jun 26 18:13:39 STP: set port 10 to learning
Jun 26 18:13:39 STP: set port 10 to forwarding
Jun 26 18:14:08 STP: set port 10 to discarding
Jun 26 18:14:08 STP: set port 10 to learning
Jun 26 18:14:08 STP: set port 10 to forwarding
Jun 26 18:16:28 STP: set port 10 to discarding
Jun 26 18:16:28 STP: set port 10 to learning
Jun 26 18:16:28 STP: set port 10 to forwarding
Jun 26 18:20:03 STP: set port 10 to discarding
Jun 26 18:20:03 STP: set port 10 to learning
Jun 26 18:20:03 STP: set port 10 to forwarding
Jun 26 18:20:32 STP: set port 10 to discarding
Jun 26 18:20:32 STP: set port 10 to learning
Jun 26 18:20:32 STP: set port 10 to forwarding
Jun 26 18:42:52 STP: set port 10 to discarding
Jun 26 18:42:52 STP: set port 10 to learning
Jun 26 18:42:52 STP: set port 10 to forwarding
Jun 26 20:54:49 STP: set port 10 to discarding
Jun 26 20:54:49 STP: set port 10 to learning
Jun 26 20:54:49 STP: set port 10 to forwarding
Jun 27 15:03:15 STP: set port 10 to discarding
Thanks,
AK