POE to Mini without traffic

User avatar
Avant
Member
 
Posts: 10
Joined: Fri Aug 07, 2015 12:47 pm
Location: Carson City, NV
Has thanked: 1 time
Been thanked: 1 time

POE to Mini without traffic

Thu Aug 03, 2017 6:08 pm

So I was wondering. Is it currently possible to set up a Mini off another Wisp switch without passing traffic onto the "parent" wisp switch. i.e. Power only over ethernet. Shutting down actual ethernet traffic over that port from either the mini or the parent switch.... The reason is that I would like to have the mini on a separate network and have no way of traffic "leaking" over the 48V POE connection.

Julian
 

Re: POE to Mini without traffic

Fri Aug 04, 2017 7:22 am

you can do that pretty easily by excluding port 1 from any VLAN on the 6-mini, also you should be powering with 48VH :)

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: POE to Mini without traffic

Fri Aug 04, 2017 8:22 am

You can do it many ways:
1) way sis like Julian said, remove from VLAN
2) uncheck the Enable box on the port on the Port's TAB on either or both switches
3) you can use VLANs to segregate the traffic but still allow you to access the switch UI

These are some ideas but there are probably more
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 29 guests