Vlan tagging with no layer 3 router tagging setup

djcharipar@ctiinc.net
Member
 
Posts: 1
Joined: Tue Jun 06, 2017 9:44 am
Has thanked: 0 time
Been thanked: 0 time

Vlan tagging with no layer 3 router tagging setup

Wed Jul 12, 2017 3:07 pm

Hello,

I am investigating netonix switch to switch vlan tagging without layer 3 vlan or ip addresses setup. Trying to see if it is possible to setup the vlans from switch to switch(both netonix)

i have only setup vlans only with ip address association with the tags. I am trying to reduce broadcast domain issues on wisp based on a cidr 16 ip pool.

I have read that it can be done but can't seem to find any thread on netonix website.
Thank
DJ

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: Vlan tagging with no layer 3 router tagging setup

Wed Jul 12, 2017 6:04 pm

Netonix don't support VLAN translation even if the switch chip probably support it. You can do it from switch to switch be using "untag" on the VID you need to translate if "untag" is not needed on a other VLAN.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 20 guests