Could this UBNT edgepoint POE power a wisp switch mini?
http://www.4gon.co.uk/ubntpoe54v80w-p-6739.html
Cheers,
Louis
POE for WISP switch mini...
- Taylag
- Member
- Posts: 2
- Joined: Mon Mar 07, 2016 5:45 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: POE for WISP switch mini...
Hi Louis,
I moved your post out of the pictures thread which is meant for pictures of installed switches.
YES it can power a WS-6-MINI quite well actually.
I moved your post out of the pictures thread which is meant for pictures of installed switches.
YES it can power a WS-6-MINI quite well actually.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1186
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 305 times
- Been thanked: 381 times
Re: POE for WISP switch mini...
The 4 extra volts can also work in your favor for long cable runs. I have been considering getting one of them but heard a rumor that Chris was coming out with a similar unit so have been holding out to test his.
I prefer to power the MINIs from another Netonix VH port simply cuz I can power them off remotely. I've been tempted to pester Dave to design a 54V PoE brick that takes PoE in to slave the PoE out. That way I could provide low current PoE from the upstream switch to control the PoE brick. My guess however is that Chris is just going to go with a white label mass produced brick from China and put the Netonix name on it, not design it in house.
I prefer to power the MINIs from another Netonix VH port simply cuz I can power them off remotely. I've been tempted to pester Dave to design a 54V PoE brick that takes PoE in to slave the PoE out. That way I could provide low current PoE from the upstream switch to control the PoE brick. My guess however is that Chris is just going to go with a white label mass produced brick from China and put the Netonix name on it, not design it in house.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 122 guests