WS-X Wall Mounting

sealfab
Member
 
Posts: 2
Joined: Wed Jul 06, 2016 6:43 am
Has thanked: 0 time
Been thanked: 0 time

WS-X Wall Mounting

Wed Jul 06, 2016 6:48 am

Do any of the smaller switches(WS-6,8,10) have screw holes on the bottom for mounting to a wall or is a bracket required?

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: WS-X Wall Mounting

Wed Jul 06, 2016 7:43 am

Personally I always hated trying to use those holes in the backs of electronics to hang on the wall. I always scratch the crap out of the back trying to get the screw heads in the holes or the screws were always slightly off preventing it from hanging right.

So Netonix went a different route with all of our smaller switches. Instead we provide (2) "through" holes that allow you to simply hold the switch to the wall where you want it and then use (2) screws that travel through the switch into the wall taking the pain out of wall mounting.

Just to not crank it down so tight as to bend the chassis which I had one RMA'd for repair as they used a screw gun and forgot to set the clutch and crunched the chassis and cracked the fan.


WS-6-MINI
WS-8-150-AC
WS-8-150-DC
WS-10-250-AC
WS-12-250-AC
WS-12-250-DC
WS-12-400-AC
WS-26-400-AC
WS-26-400-IDC
WS-26-500-DC
WS-26-DC
WS-12-DC

If you would have searched the forums you would have found this post:
viewtopic.php?f=6&t=906&p=6878&hilit=+screw+wall+mount#p6878

Image
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

sealfab
Member
 
Posts: 2
Joined: Wed Jul 06, 2016 6:43 am
Has thanked: 0 time
Been thanked: 0 time

Re: WS-X Wall Mounting

Wed Jul 06, 2016 9:03 am

Thx that's a good design, I searched for wall mount btw just dident see anything relevant in the first page of results

daniel@kstechnologies.com
Member
 
Posts: 3
Joined: Tue May 03, 2022 6:45 pm
Has thanked: 0 time
Been thanked: 0 time

Re: WS-X Wall Mounting

Wed May 04, 2022 11:08 am

Do you have a drawing of where these holes are located on the enclosure and and their size?

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 35 guests