VLANS, bonded interfaces, Netonix and Mikrotik

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: VLANS, bonded interfaces, Netonix and Mikrotik

Sun Mar 19, 2017 10:37 am

Well I would always use a mid-span injector configuration using 2 switch ports for any backhaul links. Never run traffic through the same interface to the router as traffic going from router to local radios on the tower such as APs and private PTP links such as high end customers.

I give this same advice in this post:
viewtopic.php?f=17&t=2604&p=18261&hilit=+local+radios#p18261

Review this post: viewtopic.php?t=1654&p=12766#p12766

And review this thread: viewtopic.php?f=30&t=452

And watch the video here: https://www.youtube.com/watch?v=8JvBEAD4MFM

As far as MT routers I I have no experience with as we use Cisco routers at my WISP, a Cisco 2951 at each tower.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

jg0007
Member
 
Posts: 82
Joined: Wed Jan 20, 2016 2:07 am
Has thanked: 0 time
Been thanked: 7 times

Re: VLANS, bonded interfaces, Netonix and Mikrotik

Sun Mar 19, 2017 8:58 pm

Ok Chris you recommend doing the link aggregation with two switch this aggregation that we intend to perform is backhaul links from the main point towards the distribution towers

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: VLANS, bonded interfaces, Netonix and Mikrotik

Sun Mar 19, 2017 11:15 pm

jg0007 wrote:Ok Chris you recommend doing the link aggregation with two switch this aggregation that we intend to perform is backhaul links from the main point towards the distribution towers


That is not what I said in any of those post / links above? - RE-READ ABOVE
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

jg0007
Member
 
Posts: 82
Joined: Wed Jan 20, 2016 2:07 am
Has thanked: 0 time
Been thanked: 7 times

Re: VLANS, bonded interfaces, Netonix and Mikrotik

Wed May 17, 2017 8:50 pm

Hello I have echo link aggregation (two Airfiber links) now as I can access the arrivals that are in the aggregation
I have cables connected in the port of manager of each airfiber until the ports of the netonix in each ends

Previous
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 30 guests