As a general practice, a reboot before an upgrade is extra insurance that a long running kit is not in some odd state. Of course kit can get into an odd state at any time, not just after long uptime. Of course the shorter the uptime, the lesser the odds. On flashing various small embedded linux systems, long uptimes increased the risk of failure. If you can afford the slightly longer service window, then by all means a reboot before flashing may be prudent.
Now, there is sometimes a difference between a soft boot and a full power cycle boot but unless Eric gets real crafty, I don't see a hard boot as probable. I've had some radios that a soft boot would not fix and needed the power to be yanked. There was an issue as well with the TS5 that needed the AC cord to be pulled as well, but I digress.
When I was doing server patch management, we always did a reboot before applying patches and another reboot after patching. In fact we setup Shavlik to do that automatically. I think Netonix Manager should have that option available.
BTW, have you guys come up with a TLA yet for this tool?
Netonix Manager / Control Software
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Netonix Manager RC
I just upgraded a WS-12-250A that we had forgotten about for over a year and a half. It was at a remote tower we pay little attention to.
It had v1.0.0rcX if that tell you anything. Upgraded it with the manager no problems.
3/9/2016 2:22:03 PM Created device 172.17.0.2
3/9/2016 2:22:37 PM Upgrading device 172.17.0.2 with firmware wispswitch-1.3.9.bin
3/9/2016 2:28:38 PM Upgrading device 172.17.0.2 complete, rebooting
It had v1.0.0rcX if that tell you anything. Upgraded it with the manager no problems.
3/9/2016 2:22:03 PM Created device 172.17.0.2
3/9/2016 2:22:37 PM Upgrading device 172.17.0.2 with firmware wispswitch-1.3.9.bin
3/9/2016 2:28:38 PM Upgrading device 172.17.0.2 complete, rebooting
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jjonsson - Associate
- Posts: 337
- Joined: Wed Nov 05, 2014 12:30 pm
- Location: Denmark
- Has thanked: 37 times
- Been thanked: 65 times
Re: Netonix Manager RC
sirhc wrote:
After a firmware upgrade it does a reboot normally?
I was talking about radioes, routers etc. After firmware upgrade of them, always nice to reboot everything....
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Netonix Manager RC
jjonsson wrote:sirhc wrote:
After a firmware upgrade it does a reboot normally?
I was talking about radioes, routers etc. After firmware upgrade of them, always nice to reboot everything....
You're confusing me, our software only address our switches????
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jjonsson - Associate
- Posts: 337
- Joined: Wed Nov 05, 2014 12:30 pm
- Location: Denmark
- Has thanked: 37 times
- Been thanked: 65 times
Re: Netonix Manager RC
lligetfa wrote:As a general practice, a reboot before an upgrade is extra insurance that a long running kit is not in some odd state.
I totally agree....
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Netonix Manager RC
I think he's asking to be able to schedule a report of a port from the software?
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Netonix Manager RC
Has anyone else installed this yet?
We had wanted to let the Associates play with it before we released to public.
We need feedback, feature requests, UI comments, you know a shake down.
We had wanted to let the Associates play with it before we released to public.
We need feedback, feature requests, UI comments, you know a shake down.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: Netonix Manager RC
Install howto on Debian 7, don't forget to change version for the latest at wget line.
GUI seem nice, I like the auto shell login. Would be nice it would be possible to also auto-login when opening GUI. I will ask somebody to do firmware upgrade tests.
- Code: Select all
apt-get install curl
curl -sL https://deb.nodesource.com/setup_5.x | bash -
apt-get install nodejs
cd /tmp
wget http://forum.netonix.com/netonix-manager/netonix-manager_1.0.0rc5_all.deb
dpkg -i netonix-manager_1.0.0rc5_all.deb
GUI seem nice, I like the auto shell login. Would be nice it would be possible to also auto-login when opening GUI. I will ask somebody to do firmware upgrade tests.
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Netonix Manager RC
mike99 wrote:
GUI seem nice, I like the auto shell login. Would be nice it would be possible to also auto-login when opening GUI. I will ask somebody to do firmware upgrade tests.
GUI auto-login will work with firmware 1.4.0.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: Netonix Manager RC
Probably already planned but I think "schedule" tab should have a [+] buton to add scheduled tasks.
Who is online
Users browsing this forum: No registered users and 29 guests