Mass Upgrades

tcmarkos
Member
 
Posts: 5
Joined: Wed Feb 27, 2019 11:23 am
Has thanked: 3 times
Been thanked: 1 time

Re: Mass Upgrades

Thu Mar 31, 2022 2:02 pm

I am not able to get this to work...

"You could use scp too.
scp wispswitch-1.5.12.bin admin@<switch ip>:/tmp

Then at the CLI use "cmdline" to get to the linux command prompt and run "firmware_ugprade /tmp/wispswitch-1.5.12.bin""

I got the scp done but the firmware_upgrade/tmp/wispswitch-1.5.12.bin part I just get file not found..... Any idea what Im doing wrong?

User avatar
KBrownConsulting
Member
 
Posts: 71
Joined: Wed Dec 14, 2016 3:29 pm
Has thanked: 15 times
Been thanked: 17 times

Re: Mass Upgrades

Thu Apr 14, 2022 5:49 am

Update: There was a typo in the original post in this thread mentioning the firmware_upgrade command , so if you copy & pasted the command you need to fix the typo. (I copied the typo'd command myself when I tested it which is why my original comment below both contains the typo & is incorrect!)


My original post:

I haven't tested this so proceed at your own risk...

It appears the firmware_ugprade command may have been replaced by sysupgrade, so try the following command instead:

sysupgrade /tmp/wispswitch-1.5.12.bin

JLLC
Member
 
Posts: 1
Joined: Wed Nov 20, 2019 9:42 am
Has thanked: 0 time
Been thanked: 0 time

Re: Mass Upgrades

Mon May 23, 2022 2:53 pm

Still working on web-based management software?

User avatar
sakita
Experienced Member
 
Posts: 200
Joined: Mon Aug 17, 2015 2:44 pm
Location: Arizona, USA
Has thanked: 87 times
Been thanked: 80 times

Re: Mass Upgrades

Mon May 23, 2022 5:48 pm

JLLC wrote:Still working on web-based management software?


It's called Netonix Manager see this post:

viewtopic.php?f=6&t=1549
Today is an average day: Worse than yesterday, but better than tomorrow.

Previous
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 26 guests