Page 10 of 11

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Wed Oct 17, 2018 7:02 am
by Ludvik
Alcoma ALxxF MP600X-PoE works fine with 48VH.

The manufacturer cautions not to use the two-pair power in any case.

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Fri Dec 07, 2018 6:54 pm
by Charlie
Grandstream GXV3674 Camera Works with 48V

However you must switch on the port, wait for the cable test to complete then plug it in. The power pairs are shorted together which causes the netonix to think its failed.


sirhc wrote: Unless you have "really" OLD firmware this is not true.

POE SMART will only fail to turn on if there is a CROS-SHORT between pair which if that existed would fry the switch anyway.

All UBNT airMAX 802.11n radios have pairs 3 and 4 shorted but not CROSS-SHORTED meaning blue/white blue are shorted together for positive and brown/white/brown are shorted together for negative but not a cross pair short between blue and brown which would be BAD.


Besides why would you do it the way you say, simply turn POE SMART OFF for that port on the Ports TAB. BUT UPGRADE YOUR FIRMWARE.


Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Tue Jan 29, 2019 2:35 am
by LRL
Siklu EH-8010FX works with 48HV

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Wed Feb 27, 2019 9:36 am
by tcknudson
Trango 5010 requires Tycon Xover, not in list

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Fri May 10, 2019 9:20 pm
by ahteran
Mikrotik RB800 48V
Working great :thumbsup:

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Sat Nov 14, 2020 11:49 pm
by john@citylinkfiber.com
Hi, I'm interested in confirming that the Siklu EH2500-FX radio will work with the Netonix switch via 48VH.
There is conflicting data between what Siklu says their device needs, the PoE injector they sell, etc.

I'm not sure if they have a polarity protection bridge in their radio or not.

I see that other Siklu devices are listed as good with Netonix, but not this specific model.

Thank you

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Tue Nov 24, 2020 12:30 am
by rgunderson
I can confirm the Siklu EH2500-FX works with a Netonix switch using 48VH. I lit mine up today!

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Sun Mar 28, 2021 1:15 pm
by jameswj74
I was wondering if anyone has actually used the MikroTik CCR1009-7G-1C-PC or the CCR1009-7G-1C-1S+PC in production? I know that some of the older CCR1008 were listed as working... ? The new units take 18 V - 56 V for the POE in...

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Mon Mar 29, 2021 8:39 pm
by Omniflux
I can confirm the CCR1009-7G-1C-1S+PC can be powered with a Netonix switch using 48V.

However, I get CRC errors when doing this with any Netonix switch with MAC address ec:13:b2:83:58:e8 or newer when also powering Ubiquiti AC radios. ec:13:b2:81:ce:c6 and earlier, I have no problems. If you have this combination, I would love to get feedback on whether or not you also experience this issue.

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Posted: Tue Mar 30, 2021 12:20 pm
by rgunderson
I'm powering several Lite-AP-GPS MAC=F4:92:BF with Netonix.