Page 4 of 11
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Tue May 31, 2016 9:31 pm
by Dawizman
ozmetaldrummer wrote:Ubiquiti Powerbridge M10 ??
Yep. 24V just like all the other airmax M products.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Wed Jun 01, 2016 8:51 am
by colinhowlin
SIAE AlfoPlus 17GHz works at 48VH.
Pulls around 35W at load.
We were powering these with an AirFiber power supply.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Mon Jun 06, 2016 1:37 pm
by brent.s
Has anyone tried to power a Cambium PtP820S radio off the Netonix yet?
I know it is a 48V unit, but not sure if there is any need for Pin swaps on one end for it to power correctly.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Fri Jun 10, 2016 1:04 pm
by cwachs
What setting are people powering a Ignite MetroLinq with? Included power supply says 24v 1A. Does it use that full 1A? Are you using the 24VH on the Netonix?
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Sat Jun 11, 2016 1:01 pm
by cwachs
cwachs wrote:What setting are people powering a Ignite MetroLinq with? Included power supply says 24v 1A. Does it use that full 1A? Are you using the 24VH on the Netonix?
Finally found an answer:
MetroLinq
60 GHz - Port power should be set to 24VH (1.5A). Yup we tested it and confirmed no issue powering.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Sat Jun 11, 2016 4:19 pm
by sirhc
You can power a Metrolink with 24V .75A but if you have a 24VH port available use it.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Fri Jun 17, 2016 1:17 am
by givemesam
i recommend making an edit to:
viewtopic.php?f=6&t=1178and say the metrolinq is supported fully on 24VH, and can also be powered on 24v. We have done both and it seems fine. (toughswitch did the 24v, and then got WISPsw and put it on the 24VH)
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Thu Jun 30, 2016 10:48 am
by gripper
Has anybody tried:
Ceragon (IP-20c) ??
Radwin (5000 HPMP) ??
Wavion (2400Sect) ??
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Thu Jun 30, 2016 2:14 pm
by gripper
Oops...just discovered an earlier post that confirms Ceragon IP-20C "do in fact work with 48VH PoE and consume about 45 watts when fully online."
Thx to sswireless....
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Posted: Thu Jul 14, 2016 11:45 pm
by George_EOL
gripper wrote:Has anybody tried:
Ceragon (IP-20c) ??
Radwin (5000 HPMP) ??
Wavion (2400Sect) ??
I have a Wavion/Alvarion N Sector running on the DC WISP Switch. 48VH but you need to run a crossover cable! 1+2>3+6 and vice versa. I haven't run up one of the b/g models yet but will have too soon!