LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWITCHES

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Tue Sep 20, 2016 3:36 pm

cwachs wrote:Back to Cambium subscriber modules...

The new Force 180 and Force 200 SMs are 1000BT devices. Is anyone powering these from a Netonix? Do we still need to swap pins with these newer gigabit radios or will they work with a standard cable on 24v power?

From Cambium specs sheet:
Froce 180: Ethernet Interfaced10/100/1000BaseT, Compatible with Cambium PoE pinouts (V+ = 7 & 8, Return = 4 & 5) and Standard PoE pinouts (V+ = 4 & 5, Return = 7 & 8) Input Voltage10 to 30 V
Froce 200: Ethernet Interfaced10/100/1000 BaseT, Compatible with Cambium PoE & Standard PoE pinouts Input Voltage10 to 30 V

User avatar
gripper
Member
 
Posts: 27
Joined: Thu Aug 20, 2015 12:22 pm
Location: Central Vermont, USA
Has thanked: 1 time
Been thanked: 1 time

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Sun Oct 02, 2016 10:29 pm

As of last night, I have three b/g Wavion sectors (WBS-2400-Sect) running fine on 24V, pulling 12-16w each. Looks like plenty of headroom, without going to 48VH.

Also, have Ceragon IP-20C running fine on 48VH, pulling about 39w at an idle.

Also, a Radwin 5000-HPMP (RW-5100-8225) running fine on 48V, pulling 16-17w at an idle.

All radios running normal pinout straight-through cables.

kolorasta
Member
 
Posts: 10
Joined: Sat May 14, 2016 7:38 am
Has thanked: 0 time
Been thanked: 0 time

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Fri Oct 28, 2016 10:15 am

Has anyone tested ligowave rapidfire? can it be powered by wispswitch?

Image
sirhc wrote:
YES you can power this with 48V POE option.
In the Data Sheet it shows that it is 802.3af/at so our normal 48V POE option is fine. Do you guys not look at Data Sheets?
rapidfire.png

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Fri Oct 28, 2016 1:10 pm

kolorasta wrote:Has anyone tested ligowave rapidfire? can it be powered by wispswitch?


Well this is discussed in this post at the bottom: viewtopic.php?f=6&t=1178&p=8809#p8809

Question: Can I power this device with Netonix.

Answer:
Our switches are "passive" POE which means if POE is enabled on a port the power is live so if you plug in a cable that is shorted or the piece of equipment is bad or has an incompatible polarity PIN OUT you will damage the port in the switch and probably the equipment, this damage is not covered under warranty.

There are 4 Pairs and 8 PINs in an Ethernet Cable:
Pair 1: White Orange.(PIN 1 ) & Orange.(PIN 2) is POSITIVE
Pair 2: White Green...(PIN 3) & Green...(PIN 6) is NEGATIVE
Pair 3: White Blue.....(PIN 4) & Blue.....(PIN 5) is POSITIVE
Pair 4: White Brown..(PIN 7) & Brown...(PIN 8) is NEGATIVE

24V POE Option @ .75A:
Pair 3 / PINs 4, 5 are POSITIVE
Pair 2 & 4 / PINs 3, 6, 7, 8 are NEGATIVE

48V POE Option @.75A:
Pair 3 / PINs 4, 5 are POSITIVE
Pair 2 & 4 / PINs 3, 6, 7, 8 are NEGATIVE

24VH POE Option @1.5A:
Pair 1 & 3 / PINs 1, 2, 4, 5 are POSITIVE
Pair 2 & 4 / PINs 3, 6, 7, 8 are NEGATIVE

48VH POE Option @1.5A:
Pair 1 & 3 / PINs 1, 2, 4, 5 are POSITIVE
Pair 2 & 4 / PINs 3, 6, 7, 8 are NEGATIVE

So now that you know what the PIN OUT is (which is in our Spec Sheet as well on page 17 and in the product description on our web store) all you need to do is look at the spec sheet from you device and see which POE option you can use.

If they do not specify the PIN OUT polarity break out a multi-meter and cut one end off of a patch cable and strip the wires and figure it out on your own.

Also if they have a bridge rectifier circuit like MIMOSA the device will swap the polarity the way it wants it.

WARNING - If your equipment is not specifically designed to accept power on all 4 Pairs do NOT use a VH POE option.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
support@wavspeed.com
Member
 
Posts: 2
Joined: Tue Dec 29, 2015 1:17 am
Location: Tuleta, TX
Has thanked: 0 time
Been thanked: 0 time

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Wed Nov 02, 2016 10:47 pm

So...just to be sure, the Cambium ePMP 1000 with GPS Sync works with 48V...right? Or are they only 30v and will get fried???

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Thu Nov 03, 2016 12:18 am

support@wavspeed.com wrote:So...just to be sure, the Cambium ePMP 1000 with GPS Sync works with 48V...right? Or are they only 30v and will get fried???


viewtopic.php?f=6&t=1215#p9358
"Some" Cambium ePMP runs great at 48V.
tcknudson wrote:Newer versions only support 30 volts and it will fry them, check sticker under cover!
I was going thru a stack and then fried the newest radio.

mike99 wrote:Only NonGPS radios are 30V max. GPS radio support both cambium and standard pinout and work fine at 48V (those are 802.3af compatible).


viewtopic.php?f=6&t=1690&p=14660&hilit=ePMP#p14660
ePMP
1000 AP (non-GPS) (24v)


viewtopic.php?f=6&t=1215&p=11213&hilit=ePMP#p11213
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
tcknudson
Member
 
Posts: 59
Joined: Fri Oct 30, 2015 6:43 am
Location: Henderson, NV
Has thanked: 4 times
Been thanked: 22 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Thu Nov 03, 2016 2:19 pm

450i ap no crossover.JPG
Cambium 450i and ePMP 2000 both work on 48v with no crossover.
Notice (not regular 450 or regular ePMP 1000) !!!!!

They use identical power supplies.

User avatar
rgunderson
Member
 
Posts: 30
Joined: Tue Dec 30, 2014 1:43 am
Has thanked: 11 times
Been thanked: 3 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Sun Jan 01, 2017 10:20 pm

How about a Rocket 5AC Lite?

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Mon Jan 02, 2017 1:19 am

rgunderson wrote:How about a Rocket 5AC Lite?

viewtopic.php?f=6&t=1178
24VH supplies power on all 4 pair which is needed for long cable runs (over 200 feet) on airFIBER X units but will damage normal 24V Rockets, Nanostations, and similar devices.


ALL airMAX radios use 24V not 24VH which will destroy them, the ONLY exception is the Rocket M5 Titanium which uses 48V not 48VH which will destroy it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
rgunderson
Member
 
Posts: 30
Joined: Tue Dec 30, 2014 1:43 am
Has thanked: 11 times
Been thanked: 3 times

Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT

Mon Jan 02, 2017 1:08 pm

Thanks! My confusion is from the fact that the Rocket AC unit requires power on all 4 pair.

sirhc wrote: INCORRECT STATEMENT, DO NOT LISTEN TO THIS, READ ON FOR CORRECT INFORMATION BECAUSE IF YOU STOP HERE AND TRY 24VH YOU WILL FRY YOUR RADIO AND SWITCH

PreviousNext
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 34 guests