RFC2544 test

mmurphy
Member
 
Posts: 4
Joined: Thu Dec 14, 2017 2:05 pm
Has thanked: 0 time
Been thanked: 0 time

RFC2544 test

Tue Apr 06, 2021 10:25 am

Good Afternoon,

I want to rule out the Netonix as a possible source of an issue we have.

we have a client running a RFC-2544 test across a link.
it is set up like the following

Client site A (Ciena router)-->Juniper EX2300c switch-->Microwave licence Radio link-->Netonix--> Juniper ACX2100-->Layer 2 Fiber Circuit --> Data Center Juniper ACX-2100-> Client Site B

They are experiencing drops when trying to push 320 Mb at 68 byte size. Netonix interfaces are set to 9600 MTU.

i don't believe the Netonix is the cause but maybe you could advise.
If you need more info, please let me know. i can send on RFC test results if required.

Thanks in advance.

User avatar
mike99
Associate
Associate
 
Posts: 793
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 94 times
Been thanked: 240 times

Re: RFC2544 test

Tue Apr 06, 2021 11:40 am

Why not just do the test only on the netonix to check if it's the source of the problem ?

You have at less 8 devices in the path. Personally, I would pass the test through each single device first and then, begin to add those one by one on the daisy chain with a new test every time you add a device.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 10 guests