Page 2 of 4

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Wed May 13, 2015 4:25 pm
by rebelwireless
Can't see much from the screenshot. You could post the file but you are exposing your public IP addresses if you do.

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Fri May 15, 2015 12:45 am
by Mola9850
https://community.ubnt.com/t5/airMAX-Fr ... a-p/412393

Do you think this is what is going on ??

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sat May 16, 2015 9:33 am
by jjonsson
Morten you need to provide more information. We don't know your IP setup. What IP range is your equipment etc. ?
If you want help, don't make it into a guessing competition...

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sat May 16, 2015 9:35 am
by jjonsson
Mola9850 wrote:https://community.ubnt.com/t5/airMAX-Frequently-Asked/airMAX-What-is-airMAX-Capacity-AMC/ta-p/412393

Do you think this is what is going on ??


Nope....

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sat May 23, 2015 3:13 pm
by Mola9850
So we found the error when we changed out our main switch from (EdgeSwitch :Banned: ) to Netonix, after that all units dropped to normal standby use, even devices that were 3 towers away from (EdgeSwitch :Banned: ) are now normal.

And now we only have Netonix switches :thumbsup: in our network!
So we thank you again guys :cheers: for these super cool switch. :hurray: :hurray: :hurray:

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sat May 23, 2015 3:48 pm
by sirhc
Thanks, we really appreciate the feedback and continued support!

We have some new supper cool firmware features coming out in v1.3.X.

After v1.3.X is finalized and the DC switches are perfected we plan to finish the CAP.

After the CAP is in production I think you guys will be amazed at the products we are putting on the drawing board for next year!

Think VyOS
T
hink SFP+ (for Josh Reynolds)
Think Image

Well OK I do not want to give too much away!

What we really need is to get more distributors around the globe so you guys need to make sure you ask your distributor to carry our products as this will give us the capital we NEED to hire more people and expand our product lines!

We are at about 500 switches per month, we need to get to 1,000 switches per month hopefully by end of July!

We really did not come to market until after the New Year if you think about it. Yes we started selling small numbers in November last year but WISP's were busy with the holidays and people do not buy WISP Switches for stocking stuffers. So in reality we started moving switches mid January this year which most of the northern hemisphere was hunkered down for the winter until end of February.

At this point there are over 2,000 WISP Switches installed all around the globe from Singapore to New Zealand, Australia, Germany, UK, Spain, Austria, United States, Canada, Sweden, Denmark, and Brazil to my knowledge and probably a few other countries?

Let us know if we missed your country by posting your country and planting it's flag in our list if you installed a WISP Switch there. Pirate5

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sun May 24, 2015 10:49 am
by Mola9850
I will do what I can Pirate2 , that's for sure :cheers: .

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sun May 31, 2015 2:35 pm
by jjonsson
sirhc wrote:
Think VyOS
T
hink SFP+ (for Josh Reynolds)
Think Image



You're speaking Layer 3 switch ?
If yes, please contact David Taht (bufferbloat.net) and have "Cake" implemented in the switch :-)

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sun May 31, 2015 2:45 pm
by sirhc
Surely you mean Layer 4, layer 3 is useless in a WISP environment.

You need OSPF/BGP/BFD and the likes

Re: UBNT (WDS) Need help - POSSIBLE TOOL TO HELP

Posted: Sun May 31, 2015 5:10 pm
by jjonsson
sirhc wrote:Surely you mean Layer 4, layer 3 is useless in a WISP environment.
You need OSPF/BGP/BFD and the likes


Of course......

Please look into FQ_Codel / Cake if possible (Requires CPU power)