Re: Wireshark
Posted: Wed Mar 22, 2017 9:19 am
You don't need a syntax to lunch wireshark, the're a GUI.
With linux, you can use instead
tcpdump -i $mynic
A easier way would be to connect a netonix at the bottom and use the mac-table feature that will give you the MAC and IP address if possible. If the mac-table can't see it, I don't think you will be able to find it with wireshark.
If that don't work, you could climb and install a linux or *BSD mini-pc with a serial port connected to the netonix and plug the network cable to this PC instead, After, you ssh to the mini-pc and use a CLI serial terminal like minicom to access the CLI of the switch.
With linux, you can use instead
tcpdump -i $mynic
A easier way would be to connect a netonix at the bottom and use the mac-table feature that will give you the MAC and IP address if possible. If the mac-table can't see it, I don't think you will be able to find it with wireshark.
If that don't work, you could climb and install a linux or *BSD mini-pc with a serial port connected to the netonix and plug the network cable to this PC instead, After, you ssh to the mini-pc and use a CLI serial terminal like minicom to access the CLI of the switch.