restarting vtss appl

Kick back and hang out in the lounge and talk about almost anything.
drbaker
Member
 
Posts: 5
Joined: Wed Aug 03, 2016 8:45 pm
Has thanked: 1 time
Been thanked: 0 time

Re: restarting vtss appl

Wed Jan 02, 2019 5:37 pm

I can confirm, disabling discovery tab in switch configuration the problem dissapears. Brand new switchs with last RC firmware upgrade.

User avatar
GREG3f
Member
 
Posts: 9
Joined: Wed Oct 14, 2015 8:03 pm
Location: Ontario, CANADA
Has thanked: 1 time
Been thanked: 1 time

Re: restarting vtss appl

Wed Jan 09, 2019 8:36 pm

I experienced the same issue...monitor: restarting vtss_appl in the logs and packet loss to and through the switch when the messaged appeared in the logs.Disabled the Discovery Tab option as suggested and so far so good.

I should also say the Netonix Rebooted itself either right before the packet loss started or during the issue.

This issue only appeared shortly after I upgraded a Mikrotik ARM Router to the latest stable firmware. Not sure if it was related but thought I would mention it in case it sheds some light on this bizzar issue.

WS12-250-AC with 1.5.0
Mikrotik RB3011 upgraded to 6.43.8

cbwecomm
Member
 
Posts: 6
Joined: Wed Oct 09, 2019 6:35 pm
Has thanked: 0 time
Been thanked: 1 time

Re: restarting vtss appl

Tue Nov 17, 2020 9:24 pm

This still seems to be an issue, as I just discovered it as well.

User avatar
Stephen
Employee
Employee
 
Posts: 727
Joined: Sun Dec 24, 2017 8:56 pm
Has thanked: 69 times
Been thanked: 123 times

Re: restarting vtss appl

Wed Nov 18, 2020 11:41 am

Hello cbwecomm,

Please be sure you are on the latest firmware if you are seeing this issue.
There was a significant effort sometime back to deal with vtss_appl restarts,

Here are a few more links with information about that:
viewtopic.php?f=17&t=5687&hilit=vtss_appl&start=10
viewtopic.php?f=17&t=240&p=32801&hilit=vtss_appl#p32801


If you are experiencing vtss_appl restarts with the latest firmware, please provide some more details, logs, topology, config, etc so we can try and figure out what is causing it.

Previous
Return to The Lounge

Who is online

Users browsing this forum: No registered users and 3 guests