Page 1 of 1

UCM4AC shipped with incorrect/incomplete hardware.

Posted: Tue May 15, 2018 6:22 pm
by Jeffster11
Bag inside the box had "New 4-gang" hand written but it didn't include enough of the 1/4-20 screws (12 in the bag). Curiously it did have 8 nuts which don't have a home and conveniently fit the 1/4-20 screws which would account for the 8 missing screws (damn humans). Couldn't find a way to upload a picture but I've taken one.

-Jeff

Re: UCM4AC shipped with incorrect/incomplete hardware.

Posted: Tue May 15, 2018 7:05 pm
by sirhc
read my signature on how to load pictures

Re: UCM4AC shipped with incorrect/incomplete hardware.

Posted: Tue May 15, 2018 7:33 pm
by Jeffster11
Cool...

IMG_20180515_171348.jpg

Re: UCM4AC shipped with incorrect/incomplete hardware.

Posted: Wed May 16, 2018 1:55 pm
by sirhc
So in your picture those (12) BOLTS in the GREEN box should be (20) - missing (8) BOLTS

Not sure why those (8) NUTS in the RED box are in there?

The Bolts are FASTENAL part #29162 - 20 x 1/2 1/4"

Can you check with your local hardware store, they should have them as they are a common zinc bolt.

bolt pack.png

Re: UCM4AC shipped with incorrect/incomplete hardware.

Posted: Wed May 16, 2018 2:22 pm
by Jeffster11
I already resolved the issue... I have hundreds of 1/4-20's..... Just wanted someone to know how the product is being received as well as how the issue was going to be treated.

:cheers:

Re: UCM4AC shipped with incorrect/incomplete hardware.

Posted: Wed May 16, 2018 2:31 pm
by sirhc
Jeffster11 wrote:I already resolved the issue... I have hundreds of 1/4-20's..... Just wanted someone to know how the product is being received as well as how the issue was going to be treated.

:cheers:


I have people opening each box in the warehouse checking bolt bags to make sure this does not happen again.

Although there is no way for us to check boxes already in the channel.

I appreciate you letting us know.