WS-6-Mini Chaining

Technical discussions about our hardware electronics with our product engineer.
austinjw1955
Member
 
Posts: 3
Joined: Mon Aug 29, 2016 12:12 pm
Has thanked: 0 time
Been thanked: 0 time

WS-6-Mini Chaining

Tue Aug 30, 2016 10:16 am

If I use a supply voltage from a Ubiquiti AF24 with 3 WS-6-Minis chained together 1 each (mini) to supply POE to 3 Ubiquiti 5-AC-Prisms (total 9) rated at 8W each will there be enough POE current to operate all 9 5-AC-Prisms.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: WS-6-Mini Chaining

Tue Aug 30, 2016 10:55 am

How much cable between each switch?

So you want:
AF24POE====[WS6]====[WS6]====[WS6]

Then you want each WS6 to power (3) airPRISIM radios?

You're going to have voltage drop that is for sure and the last switch will be no where near 48V input but this depends on cable length.

No, your not going to have enough current/watts

Always assume higher peak demand then UBNT claims as MAX or PEAK draw
I would assume 12 watts per radio so 9 x 12 watts = 108 watts for 9 radios alone.
I would assume 5 watts (closer to 4 watts but always assume higher) per switch so 3 x 5 watts = 15 watts

108+15=123 watts

An AF24 POE adapter is 1.2A or 1.2 x 50V = 60 watts

Even their POE-54-80W POE adapter is only 80 watts. Now this adapter is better to use than an AF24 for longer cable runs to overcome voltage drop and it does have 20 additional watts.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

austinjw1955
Member
 
Posts: 3
Joined: Mon Aug 29, 2016 12:12 pm
Has thanked: 0 time
Been thanked: 0 time

Re: WS-6-Mini Chaining

Tue Aug 30, 2016 11:27 am

The 5AC-Prisms are 24V wouldn't that make a difference?

User avatar
lligetfa
Associate
Associate
 
Posts: 1186
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 305 times
Been thanked: 381 times

Re: WS-6-Mini Chaining

Tue Aug 30, 2016 12:09 pm

No. Watts are watts regardless of volts.

Maybe you should consider running separate power wires feeding the barrel connectors and of course use a DC supply that puts out enough watts.

You might want to consider the WS-8-150-DC in place of the MINIs as they can handle the voltage drop.

austinjw1955
Member
 
Posts: 3
Joined: Mon Aug 29, 2016 12:12 pm
Has thanked: 0 time
Been thanked: 0 time

Re: WS-6-Mini Chaining

Tue Aug 30, 2016 12:22 pm

Thanks Guys,

Ohms law bites me in the ass...

Was just trying to use existing cat5e.

Got three cables going up guess I'll just use three POE supplys and three WS-6s.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: WS-6-Mini Chaining

Tue Aug 30, 2016 12:25 pm

Yes and you can power with (3) POE bricks or (1) WS-12-250-AC
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
now
Member
 
Posts: 6
Joined: Fri Dec 04, 2015 2:50 pm
Location: Walcott, IA
Has thanked: 1 time
Been thanked: 1 time

Re: WS-6-Mini Chaining

Sat Sep 17, 2016 10:46 pm

sirhc wrote:Yes and you can power with (3) POE bricks or (1) WS-12-250-AC


Whats the max Watts per port on the WS-12-250-AC ?

Thanks.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: WS-6-Mini Chaining

Sun Sep 18, 2016 8:14 am

now wrote:Whats the max Watts per port on the WS-12-250-AC ?

CLICK IMAGE TO VIEW FULL SIZE
Untitled.jpg
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
lligetfa
Associate
Associate
 
Posts: 1186
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 305 times
Been thanked: 381 times

Re: WS-6-Mini Chaining

Sun Sep 18, 2016 9:29 am

Do Volts times Amps to convert to Watts
50V X 1.5A = 75W

User avatar
now
Member
 
Posts: 6
Joined: Fri Dec 04, 2015 2:50 pm
Location: Walcott, IA
Has thanked: 1 time
Been thanked: 1 time

Re: WS-6-Mini Chaining

Mon Sep 19, 2016 12:14 am

Thank you Sirhc & lligetfa for you response, I apologize for my o duh moment.

Next
Return to Dave's Lab

Who is online

Users browsing this forum: No registered users and 5 guests