3.3V Cap Issue WS-8-150-AC Clarification

DOWNLOAD THE LATEST FIRMWARE HERE
JeffreyS
Member
 
Posts: 13
Joined: Thu Nov 11, 2021 12:20 pm
Has thanked: 2 times
Been thanked: 4 times

3.3V Cap Issue WS-8-150-AC Clarification

Fri Mar 25, 2022 3:46 pm

I recent purchased 2 WS-8-150-AC switches. I put one in production to run 3 POE devices and has 5 ports in use total.

2 ports are links to other switches, 1 is for a Axis PTZ, 1 is for a Axis Bullet camera and 1 is a Rajant breadcrumb. I can power up the bullet camera and rajant and all is fine. I then try to power up the PTZ and then the switch goes into a reboot loop.

After searching I found another topic that told me I needed todo a crossover cable for the PTZ. Doing so did not help. I swapped in the other switch and same deal.

I moved the PTZ to a Axis midspan for power and all seems to be running fine.

Nothing I can see in logs and didn't have my serial adapter with me. I don't have the extra equipment to bench test this setup.

While I did some more digging, I found references to a 3.3V Cap issue from a few years back but nothing specific to check for. Is there something I can check or should I just provide the MAC's and wait to hear if these switches are from that batch?

Serial/MAC:
ec:13:b2:d2:be:48
ec:13:b2:d2:b9:78

JeffreyS
Member
 
Posts: 13
Joined: Thu Nov 11, 2021 12:20 pm
Has thanked: 2 times
Been thanked: 4 times

Re: 3.3V Cap Issue WS-8-150-AC Clarification

Thu Apr 21, 2022 5:53 pm

Hello? Any body?

User avatar
Dave
Employee
Employee
 
Posts: 723
Joined: Tue Apr 08, 2014 6:28 pm
Has thanked: 1 time
Been thanked: 158 times

Re: 3.3V Cap Issue WS-8-150-AC Clarification

Thu Apr 21, 2022 7:26 pm

I will get this checked for you on Monday....but that issue was fixed a long time ago...

JeffreyS
Member
 
Posts: 13
Joined: Thu Nov 11, 2021 12:20 pm
Has thanked: 2 times
Been thanked: 4 times

Re: 3.3V Cap Issue WS-8-150-AC Clarification

Mon May 30, 2022 5:08 pm

Dave wrote:I will get this checked for you on Monday....but that issue was fixed a long time ago...


Did you have a look?

This would nearly be a case of me getting new-old stock and I think my issue is Axis running reverse polarity on their PTZ camera's but want to cover all bases.

Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 18 guests