Port disable/enable issue

DOWNLOAD THE LATEST FIRMWARE HERE
Ludvik
Experienced Member
 
Posts: 105
Joined: Tue Nov 08, 2016 1:50 pm
Has thanked: 15 times
Been thanked: 15 times

Port disable/enable issue

Wed May 27, 2020 12:44 pm

Hi.

In version 1.5.5 (on WS-6-MINI). Tested on port 6. Screenshots are included.

Port has only one VLAN, untagged management. Everything working fine. If I disabling port 6, data not forwarded ( :-) ), POE still powering plugged device.
Next step is cold reboot.
After that, enable port 6. Data not forwarded, device's MAC is found in VLAN 1 (that not exists!).

Workaround: edit VLAN on port 6 (exclude, save config and set back as untagged).
Attachments
netonix_enabledisableport_macs.png
netonix_enabledisableport_vlans.png

Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 64 guests