WS-12-DC 24 VOLT POE FAILURE

DOWNLOAD THE LATEST FIRMWARE HERE
oznet
Member
 
Posts: 3
Joined: Fri Jul 26, 2019 4:35 pm
Has thanked: 0 time
Been thanked: 0 time

WS-12-DC 24 VOLT POE FAILURE

Mon Apr 06, 2020 8:40 am

I have 2 brand new ws-12-dc switches the have no 24 v poe available.
Says no fan dedected
Shows -.07 volts on 24 volt board.
Exactly 50.1v input voltage supplied by 10 amp ICT power Supply.


Neither of these switches would work out of the box. In order to get my site up I am using External POE injectors.
I have several of these deployed and have worked perfectly. Any Ideas?

User avatar
lligetfa
Associate
Associate
 
Posts: 1186
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 305 times
Been thanked: 381 times

Re: WS-12-DC 24 VOLT POE FAILURE

Mon Apr 06, 2020 9:18 am

You posted to the wrong (Customer AP) forum. I moved this thread to the WISP Switch forum for you.

dan@e-co-op.com
Member
 
Posts: 3
Joined: Wed Dec 18, 2019 3:57 pm
Has thanked: 0 time
Been thanked: 0 time

Re: WS-12-DC 24 VOLT POE FAILURE

Fri Apr 01, 2022 9:33 am

I'm seeing the same failure on one of our WS-12-DC's, but can't find the resolution here. What is the fix?

viama
Member
 
Posts: 3
Joined: Tue Aug 17, 2021 8:29 pm
Has thanked: 0 time
Been thanked: 0 time

Re: WS-12-DC 24 VOLT POE FAILURE

Sun May 15, 2022 5:05 pm

Any solution?

thomas
Member
 
Posts: 40
Joined: Fri Jan 14, 2022 1:46 pm
Has thanked: 1 time
Been thanked: 4 times

Re: WS-12-DC 24 VOLT POE FAILURE

Tue May 31, 2022 12:07 am

had two of these a while ago that had a filter cap lodged under one of the mux chips during manufacturing, both boards with the exact same defect. it was for the current sensing, but the 3v3, 24v and 48v vsensing sensing is done right beside it. if the topside resistor of the 24v voltage divider was tombstoned, for example, I believe it would read 0V on the 24rail. not sure if the switch itself would refuse to enable 24v when in this state, but hey, it's a theory.

doesn't account for missing fan though

Return to Hardware and software issues

Who is online

Users browsing this forum: Bing [Bot] and 22 guests