Switches failing to apply new VLANS

[sirhc]

Didn't fix it. Seems if you enable port isolation when Q-in-Q is enabled it destroys the vlan config and you have to blow it away and make it new.

Well I'll put on list to look at.

So far v1.5.25 is most stable version we ever released so make sure to upgrade all units

Send your configuration backup file to Stephen with a detailed description how to recreate issue.

stephen@netonix.com

There is one other small issues he's going to fix, i think radius but right now he's at a critical point on WS4 firmware to prove hardware so we can proceed with small pre sales production run.

Yea it's now called WS4 as we went with newest chip but still in same family as WS3 so firmware will be released each time in conjunction and WS3 will inherit all features with WS4 including eventually full routing including static routes, OSPF, BGP (not capable of holding world routes) but I run BGP on my edge with a Cisco that also can not hold world routes which is really only needed if multi honed.

[sirhc]

You know Matt i can't remember the last positive post you have ever made?

v1.5.25 fixed soooo many issues, memory leaks, hackability, SFP issue on reboots, NTP, and the list is long on things fixed.

60K lines of code rewritten in 4 months. Every person worked 7 days aweek 12 plus hours a day to get it out there.

[mhoppes]

I don't come to the forums when things work :). We have tons of these switches in operation.

[sirhc]

I don't come to the forums when things work :). We have tons of these switches in operation.

Well i guess that as close to a compliment I'll get, I'll take what I can get.

Thanks