Chris,
This is that 'strange' 12 port that was causing a bunch of grief, now on 1.1.0 here in the office that I use for testing radios, etc. Just today I was powering on a port for a Powerbeam 620AC and noticed port 5 was showing 16W draw, with nothing plugged into it. Rebooted the switch and still shows 16W. It powers a radio fine, but it's just pegged at 16W as long as the port has power. Going to power it off here in a second after I'm done flashing some radios and see if that fixes it.
Odd power reading on WS-12-250A
-
WisTech - Associate
- Posts: 209
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 5 times
- Been thanked: 63 times
Re: Odd power reading on WS-12-250A
Nope, power cycled, still shows port 5 as drawing 16 watts and nothing is plugged in.
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Odd power reading on WS-12-250A
Hi Tony,
Well you get RMA #6 so please send the switch back, this one was always a little flaky from the get go if I remember correctly?
I will PM you the RMA info for a replacement.
Well you get RMA #6 so please send the switch back, this one was always a little flaky from the get go if I remember correctly?
I will PM you the RMA info for a replacement.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 47 guests