Page 7 of 9
Re: Memory usage
Posted: Fri Aug 09, 2019 12:02 pm
by Ludvik
In this piece yes, I have SFP Gigalight GE-GB-P3RC-J (RJ45 gigabit).
But it's an exception. I don't have SFP modules in most netonix switches. Memory problem have switches without SFP option too.
Re: Memory usage
Posted: Fri Aug 09, 2019 12:51 pm
by Stephen
OK thanks for the info.
Re: Memory usage
Posted: Wed Nov 27, 2019 5:51 pm
by cbl
We're seeing this a bit on 1.5.4.. traced it back to the "Pause Frame" Storm Control option. Disabling that, and memory goes down to normal.
Pre: 124MB in use.
Post: 44MB in use.
Re: Memory usage
Posted: Wed Nov 27, 2019 6:32 pm
by Ludvik
I think that is because enabling or disabling some services causes restart vts_appl (or other daemon). It will help, but not forever.
Re: Memory usage
Posted: Fri Dec 06, 2019 9:11 pm
by nroufus
cbl wrote:We're seeing this a bit on 1.5.4.. traced it back to the "Pause Frame" Storm Control option. Disabling that, and memory goes down to normal.
Pre: 124MB in use.
Post: 44MB in use.
Able to temporarily fix when toggling Pause Frame to either state too, if it's caught early enough. Seen switches reboot upon GUI login if it has gone too far.
Re: Memory usage
Posted: Fri Dec 06, 2019 11:52 pm
by Stephen
This the same on 1.5.5?
Re: Memory usage
Posted: Wed Dec 18, 2019 2:19 pm
by jorgenekah
Hi I am new to Netonix, I have only 25 days using a WS-12-250-DC, I came to this forum because everyday my memory usage was increasing up to 116MB today so I knew there must be an issue, I am running 1.5 firmware, after reading this post I disabled the "Pause Frame" storm control option and memory usage came back to 48.9MB. Are you planning to fix this usse?
Re: Memory usage
Posted: Wed Dec 18, 2019 2:28 pm
by jorgenekah
jorgenekah wrote:Hi I am new to Netonix, I have only 25 days using a WS-12-250-DC, I came to this forum because everyday my memory usage was increasing up to 116MB today so I knew there must be an issue, I am running 1.5 firmware, after reading this post I disabled the "Pause Frame" storm control option and memory usage came back to 48.9MB. Are you planning to fix this usse?
BTW, what is that Pause Frame used for? I have unable that option in the meantime
Re: Memory usage
Posted: Fri Dec 20, 2019 3:45 pm
by jorgenekah
hey guys while I am waiting for some netonix emplyee to answer questions above, I have tried disabling ths STP ports one by one and that seems to have resolved the issue, yiu can give it a try, anyway waiting for explanantions
Re: Memory usage
Posted: Mon Dec 23, 2019 4:27 pm
by sakita
Pause frames are a normal part of TCP flow control. The storm control feature deals with the issue of a misbehaving device that floods a port with excessive pause frames. There are devices this has been a known bug with (e.g. some other brand switches and radios).
Without this feature on the switch a misbehaving device can flood a port with pause frames causing problems such as severely reduced throughput.
viewtopic.php?f=17&t=671&hilit=pause+frame