Can't get SNMP to Work
-
lligetfa - Associate
- Posts: 1186
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 305 times
- Been thanked: 381 times
Re: Can't get SNMP to Work
I have the same issue. I keep needing to disable and then enable it to get it to work. It would seem every time I update the firmware, SNMP dies.mhoppes wrote:Oh that's odd. I had to disable and then re-enable the SNMP server on the switches and now everything is working. Version 1.0.8
-
lligetfa - Associate
- Posts: 1186
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 305 times
- Been thanked: 381 times
Re: Can't get SNMP to Work
What OID are you looking to for the port description? I've only been able to pull the default description, not what I entered.
- Selection_006.jpg (315.55 KiB) Viewed 4624 times
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Can't get SNMP to Work
I just asked the programmer (Eric) about this description
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Can't get SNMP to Work
Added port descriptions for SNMP to the To Do list.
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
FIXED
Eric changed/fixed SNMP not reporting port description entered in UI in the latest firmware release v1.0.10rc8 now available for download.
Please test it and report back what you think!
There is a few more improvements we want to put into v1.0.10 final release by next Tuesday hopefully after we fully test it.
We will then release the RC version of 1.1.0 for those that want some of the new features outlined in firmware road map.
We would like to finish off the WISP Switch firmware in January so we can have Eric concentrate on the CAP so we can get that released.
Look for the 8 port switch to become available around 3rd week of January for those that want a small form factor switch.
BETA DC versions of 8 and 12 port hopefully by end of January for those that are in need!
Please test it and report back what you think!
There is a few more improvements we want to put into v1.0.10 final release by next Tuesday hopefully after we fully test it.
We will then release the RC version of 1.1.0 for those that want some of the new features outlined in firmware road map.
We would like to finish off the WISP Switch firmware in January so we can have Eric concentrate on the CAP so we can get that released.
Look for the 8 port switch to become available around 3rd week of January for those that want a small form factor switch.
BETA DC versions of 8 and 12 port hopefully by end of January for those that are in need!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1186
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 305 times
- Been thanked: 381 times
Re: Can't get SNMP to Work
rc8 fixed both issues... mini_snmpd starts on reboot and descriptions now show on a walk.
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Can't get SNMP to Work
Yea but we broke SMTP awhile ago in 1.0.10rc5 and Les just noticed it so we will post new version in about 30 minutes. 
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1186
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 305 times
- Been thanked: 381 times
Re: Can't get SNMP to Work
sirhc wrote:Yea but we broke SMTP awhile ago in 1.0.10rc5 and Les just noticed it so we will post new version in about 30 minutes.
So... I have to test *every* feature every time a new release comes out?
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: Can't get SNMP to Work
Soooo, everything working as expected now?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 62 guests