Netonix Forums

FIXES
- Fixed VLAN configuration
- Fixed slowness with configurations with hundreds of VLANs
- Fixed slowness with MAC Table with thousands of MACs
- Fixed problem with MAC Table on SFP ports on 12 port models
- Fixed POE power being turned off when port is disabled or not in a VLAN if POE Smart is enabled
- Fixed IP address lookup for MAC Table
- Fixed support for WS-12-DC
- Fixed some log messages
- Fixed problem with Auto backup TFTP URLs containing a path
- Changed input voltage check to only happen on dumb DC models

ENHANCEMENTS
- Added reboot after resetting to defaults in CLI
- Added timed shutdown periods for PoE on DC models
- Improved VLAN tab UI
- Added Flow Control indicator to Link column on Status tab
- Added email notifications for LACP port status changes
- Changed RSTP to be enabled by default

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still flaky
- IPERF is a work in progress

Released 9/22/2015

FIXES
- Fixed flow control on dual SFP ports
- Fixed PoE power being turned off when port is disabled
- Fixed problem with MAC table not being displayed
- Fixed selecting 24V when bulk editing PoE settings
- Fixed bug parsing times in timed shutdown periods for PoE on DC models
- Fixed login problem when changing credentials name without also changing password
- Fixed DHCP fails it falls back to a static address but continues to try to get a DHCP address
- Fixed setting SNMP community string in CLI
- Fixed problem with changes to Switch Name not taking effect immediately

ENHANCEMENTS
- Added autonegotiation to dual SFP ports
- Added error condition notifications to the UI
- Added meters to UI
- Added sysDescr to SNMP with model number
- Added missing indexes to SNMP (fan, voltage, poe status and temp)
- Added SMTP Local Hostname option
- Added root bridge ID and port role to STP tab
- Added PoE Smart check for suspected 24V devices when selecting 24VH POE
- Added option to use web interface on HTTP as well as HTTPS

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still flaky
- IPERF is still a work in progress
- WS-6-MINI and WS-8-250-AC and WS-8-250-DC always see a reboot as cold which you may have your first POE Port Shut OFF after reboot.
We are working on this ISSUE

Released 10/27/2015

FIXES
- Changed accepted voltage ranges on some models
- See FIXES for v1.3.5 above

ENHANCEMENTS
- More verbose I2C error handling and reporting
- See ENHANCEMENTS for v1.3.5 above

KNOWN ISSUES
- Ubiquiti Discovery Protocol is still flaky
- IPERF is still a work in progress
- WS-6-MINI and WS-8-250-AC and WS-8-250-DC always see a reboot as cold which you may have your first POE Port Shut OFF after reboot.
We are working on this ISSUE
Released 10/28/2015

FIXES
- Fixed issue with RADIUS passwords that have special characters
- Fixed flow control on quad SFP ports

ENHANCEMENTS
- Added auto negotiation to quad SFP ports
- Added more meters to the Device Status page

KNOWN ISSUES
- Last know IP address on MAC table introduced in v1.3.0 causes high CPU usage if running a large FLAT network
- Ubiquiti Discovery Protocol Still Broken
- IPERF is still a work in progress
- After upgrading to v1.3.7 make sure to read this POST
viewtopic.php?f=17&t=1180&p=8865#p8865

Release 11/9/2015

FIXES
- Select all ports and add POE did not work correctly
- Port 1 Enables itself on reboot if disabled
- UI formatting Bugs
- Changed PoE Smart to now only check for "cross-shorts"
- Change voltage calculations to use 1 decimal point of precision
- Fan failure detection changes
- Better I2C error handling, primarily helps DC switches but better for all
- Fixes for DC switches Power Tab conditions

ENHANCEMENTS
- Add configurable config save timeout

KNOWN ISSUES
- Ubiquiti Discovery Protocol Still Broken
- large flat networks MAC table requiring too much CPU time
- IPERF is still a work in progress


Released 11/20/2015

FIXED
- Fixed clear log
- Fixed SNMP using 100% CPU
- Fixed config revert not working
- Fixed per-port graphs that were broken if switch was up less than 1 hour
- Fixed condition where DC2DC power supply failed to wake up switch from hibernation mode
- Fixed where unresolvable hostname could hang syslog server
- Fixed DC power supply voltage range
- Fixed UBNT Discovery name
- Fixed Watchdog, now disabled if port is disabled
- Fixed so now retains log if log daemon is restarted
- Fixed so CLI no longer saves config unless something was changed
- Fixed Log file formatting
- Fixed UBNT Discovery - FINALLY
- Fixed Linux log
- Fixed Loop protection log entry refers to wrong port number
- Fixed Broadcast storm when using LACP and RSTP
- Fixed Unable to change RSTP path cost for LAGs
- Fixed MAC table eating up CPU time when you have hundreds and hundreds of MAC entries.
- Fixed SNMP, Changed from mini-snmpd to net-snmp, a more common and well tested snmp daemon.

ENHANCEMENTS
- Added enable/disable VLAN to CLI
- Added "clear log" CLI command
- Added LLDP Discovery
- Added changing of Safe Mode Timer and ability to disable Safe Mode
- Added ability to reset counters per port instead of all
- Added Enhancement for MAC table
- Added clear stats command to CLI
- Added HTTP watchdog - Customer can now create a watchdog event based on an HTTP URL
- Allow up to 253 character RADIUS secret - USER REQUESTED
- Delay I2C init in SMART DC power supply firmware to fix random RJ45 POE light on a cold boot - COSMETIC FIX ONLY

KNOWN ISSUES
- SNMP reported up time is incorrect
Released 1/30/2016

FIXED
- Fixed SNMP reported uptime
- Fixed rare problem with mac table not loading
- Fixed small UI issues with Firefox and IE
- Fixed SNMP CPU counters
- Fixed SNMP firmware version string
- Fixed so log messages now used VLAN ID instead of index
- Fixed RADIUS to work with SSH
- Fixed port not being in VLAN Bug
- Fixed pps being included in totals when port was excluded
- Fixed false fan failure detection and alerts
- Fixed cleared log to indicate who cleared it
- Fixed so no duplicate VLAN ID allowed
- Fixed SSH session ending messages so not reported by dropbear
- Fixed Firefox auto complete (workaround)
- Fixed console in UI
- Fixed graphs on Status Tab
- Fixed some incorrect voltage readings/alerts
- Fixed I2C communications problems mostly for SMART DC models
- Fixed RSTP path cost now able to set to 1
- Fixed Memory leak
- Fixed log messages to not report successful logins (dropbear)
- Fixed 10MB led
- Fixed IGMP Snooping issue
- Fixed utility packets using Tx Q1 instead of Q0

ENHANCEMENTS
- Increased MAX allowed DC input voltage for WS-8-250-DC and WS-12-250-DC to 61.5V for off grid solar sites
- IMPROVED SMART DC switches I2C communication
- Added HTTP Port to be changed
- Added telnet for CLI access
- Added Discovery to Tools menu
- Added multiple languages support
- Added VLAN information to SNMP
- Added Revert Timer Help Balloon
- Added total power consumption to SNMP
- Added DC input voltage graph on the Device/Status Tab
- Added tool tips to some buttons
- Added increased SMTP Username length
- Added Power tab on all models for time conditions
- Change ifDescr and ifAlias
- Time Condition graphic on Christmas tree
- Added To line to email header
- Added more graphs for SMART DC models under Device/Status Tab
- Added an Enable/Disable check box for TFTP backup
- Reduced CPU usage
- Added Flow Control Pause Frame Storm Protection
- Added the ability to configure Flow Control Obey/Generate/Both per port

KNOWN ISSUES
- Some language templates need help
- Discovery interfered with STP and LACP and caused high CPU utilization
- Could not disable Loop Protection
- UI Formatting bugs

Released 5/20/2016

This version fixed 2 CRITICAL BUGS in v1.4.0

There may still be some issues to be worked out but we NEEDED v1.4.X to start shipping out the new WS-8-150-AC and WS-8-150-DC.

FIXED
- Fixed the ability to DISABLE Loop Protection
- Fixed Discovery interfering with STP & LACP
- Fixed some UI bugs

ENHANCEMENTS
- Added some help mouse over balloons
- Added some help text to upgrade menu

KNOWN ISSUES
- Some language templates need help
- SFP Stats for WS-10-250-AC broken - will be fixed in v1.4.2rcX
- Disabling the Discovery Tab requires a reboot to really disable the service. Enabling the Discovery Tab has caused some people to experience high CPU usage.

Released 5/29/2016

FIXED
- Fixed SFP Stats for WS-10-250-AC
- Fixed Disabling Discovery Tab in the UI so it actually disables the service
- Fixed HIGH CPU utilization wen Discovery Tab was enabled
- Fixed port watt usage on the WS-8-150-DC
- Fix null switch name in emails
- Fix problem with ubnt discovery interfering with STP (we think this is fixed waiting on feed back)
- Fix for IGMP Snooping with VLANs (we think this is fixed waiting on feed back)

ENHANCEMENTS
- Added option to disable IGMP querier per VLAN if IGMP snooping is enabled
- Increased the acceptable voltage ranges to prevent false alerts
- Tweaked Pause Frame Storm Protection

KNOWN ISSUES
- Some language templates need help - please contact us to help
- Clearing Stats on SFP ports singly is broken on some models - Known broken on WS-10-250-AC and WS-12-250-XX
- If you add a port bounce via the CLI it will corrupt your config file - URGENT
- If you have SMTP alerts enabled and the switch can not reach the SMTP server or the SMTP server is slow for what ever reason it messes up
- Bug with shell exit
- Missing field on scheduled port bounces created in CLI will cause a config file to become corrupt
- Occasional invalid statistics reported to the UI
- Clearing of stats on SFP ports broken
- SNMP ifName/ifDescr/ifAlias incorrect
- Bug with console login when using passwords with special characters
- Power budget on WS-8-150-DC incorrect
- CDP and LLDP on SFP ports on 12 port models broken
- SMTP can caused UI to become unresponsive if there was an issue with server
- Reboot command does not do warm boot properly
- IGMP snooping with vlans broken
- Incorrect port number on LACP notification
- Colour of 100M links on SFP ports incorrect
- Bug that can cause duplicate switch processes to start whenever an email alert is sent and eat up CPU time.

Released 6/15/2016

Special Note:
v1.4.3 was short lived as I posted it and realized that SNMP was broken in the compile so I had to change to v1.4.4 since a couple people had already downloaded it.

Released 9/5/2016