Page 7 of 10
v1.2.0rc9
Posted: Fri Apr 17, 2015 7:09 pm
by sirhc
FIXES
- Fixed DHCP setting default gateway and DNS
- Fixed VLAN configuration with CLI
- Fixed changing password with CLI
KNOWN ISSUES
- None
Released - 4/17/2015
v1.2.0rc10/11
Posted: Tue Apr 21, 2015 10:44 pm
by sirhc
FIXES
- Fixed saving config in human readable format when configuring with CLI
- Fixed fan thresholds
- Fixed fan issue with 1.2.0rc10
ENHANCEMENTS
- Added tarpit functionality to SSH server
- Added ability to use port range when configuring VLANs
- Added showing IP address of management VLAN to "show vlan" CLI command
KNOWN ISSUES
- None
Released - 4/22/2015
v1.2.0rc12
Posted: Mon Apr 27, 2015 10:37 pm
by sirhc
FIXES
- Fixed CLI configuration allowing Untagged port on multiple VLANs
- Fixed conflict between STP and loop protection
ENHANCEMENTS
- Added paging to "show config" CLI command
KNOWN ISSUES
- None
V1.2.0
Posted: Tue May 19, 2015 9:47 am
by sirhc
Same as v1.2.0rc12
Released 5/1/2015
v1.2.2
Posted: Tue May 19, 2015 9:49 am
by sirhc
FIXES
- Fxed problem with SMTP when not using authentication
- Disabled SNMPv1 for security reasons
ENHANCEMENTS
- Changed default MTU 1528
KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky
Released 5/19/2015
v1.2.3
Posted: Sun Jul 12, 2015 12:12 pm
by sirhc
FIXES
- Fixed problem when disabling IP address on VLANs
- Fixed trunking VLAN ports with only the default VLAN configured
ENHANCEMENTS
- Changed default MTU 1528
KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky
Released 7/12/2015
v1.2.4
Posted: Wed Jul 15, 2015 10:35 pm
by sirhc
FIXES
- Fixed FALSE Loop Detection with Loop Protection across VLANs
KNOWN ISSUES
- Ubiquiti Discovery Protocol is still a little flaky
Released 7/15/2015
v1.3.0
Posted: Sun Aug 16, 2015 9:29 pm
by sirhc
FIXES
- Fixed problem with SNMP reporting firmware version
- Fixed TFTP commands in CLI
- Fixed trunking VLAN ports with only the default VLAN configured
- Fixed problem when disabling IP address on VLANs
- Fixed reading 48VH current
- Fixed problem with loop protection between VLANs
- Improved getting time from NTP server
- Improved SFP modules compatibility and better recovery on faults
- Updated busybox for DHCP fixes
ENHANCEMENTS
- Added option to exclude syslog messages from NMS - Set on the Device/Configuration Tab
- Added support for 802.1ad aka QinQ aka Provider Bridging
- Added PoE Smart feature - POE Smart now only checks ports for cross shorts on cold boot and when applying POE to a port
- Added Port utilities menu (Cable Diagnostics, Port Bounce, Port Detail) on Ports tab
- Added button to re-run cable diagnostics
- Added option to require login on console port
- Added RADIUS login option
- Added "Last IP" to MAC table (ARP learning)
- Added "Allowed VLANs" to Trunk ports
- Added IGMP Snooping
- Added Iperf client and server
- Added support for WS-12-DC, WS-12-250-DC, WS-8-250-DC, AND OTHERS
- Added Power Priority for WS-12-250-DC
- Added 60 second timeout to SMTP configuration test
- Updated SNMP MIB with Netonix's Private Enterprise Number (46242)
- Updated SNMP MIB with DC model statistics
- Updated SNMP daemon with DC model statistics
- Improved performance of the GUI Log page
- Changed default MTU to 1528
KNOWN ISSUES
- Ubiquiti Discovery Protocol is still flaky
- Port Bounce is not powering down for 5 seconds - DO NOT RAPID FIRE PORT BOUNCE COULD DAMAGE EQUIPMENT
This issue also affects Ping Watchdog, Scheduled Port Bounce,
- POE SMart is broken, it applies power then tests for shorts....I KNOW RIGHT
Released 8/16/2015
v1.3.1
Posted: Tue Aug 18, 2015 10:27 pm
by sirhc
v1.3.1 Was pushed out to fix some issues that could cause people problems
FIXES
- Fixed PoE Smart - POE Smart was applying POE then checking for cross shorts - Nuff said
- Added warnings when disabling HTTPS or SSH in GUI - Too many people were locking themselves out of the UI
- Made firmware upgrade dialog more user friendly- Too many people were complaining about this
- Fixed port Scheduled Port Bounce process getting restarted when correct time is set
- Fixed Ping Watchdog - The duration was not lasting the specified period of time
Released 8/18/2015
v1.3.2
Posted: Fri Aug 21, 2015 9:03 pm
by sirhc
FIXES
- Changed input voltage safety check to only work on WS-12-DC model
----This routine could cause switches with AC or DC power supplies to turn off 48V POE if the input voltage sensors are damaged or fail.
----A few people have had issues which could be damaged sensors - We are investigating
ENHANCEMENTS
- Added ability to emails log to arbitrary email address
- Added version selection for SNMP
Released 8/21/2015